topic Re: Can 2500 do SDLC? in Server Networking

Can 2500 do SDLC?

blr — Tue, 12 Mar 2002 21:24:59 GMT

I am investigating the possibility of using our 2500 router for SDLC. We have an AS/400. Is this possible and does anyone have advice on configuration and connections?

Thanks,

Bob

Re: Can 2500 do SDLC?

skoretsk — Wed, 13 Mar 2002 01:00:03 GMT

IOS images with IBM feature support (IP Plus, Enterprise, etc) support SDLC device attachment on Cisco routers. Cisco Feature Navigator will provide specific information on Cisco IOS feature set images:

http://www.cisco.com/cgi-bin/Support/FeatureNav/FN.pl

What are you planning to connect the AS/400 to?

Re: Can 2500 do SDLC?

blr — Wed, 13 Mar 2002 14:29:02 GMT

I am connecting the AS/400 to an old Norand RF Base Controller - RB4000. Currently this is done with a couple IBM modems and a point to point leased line. I don't know how to connect that controller to a Cisco router.

Re: Can 2500 do SDLC?

dmccullo — Wed, 13 Mar 2002 15:31:47 GMT

Hi Bob,

This sounds pretty straightforward, DLSw SDLC secondary at the AS/400, and DLSw SDLC primary at the Norand device. The only thought I offer is that, because it's serial in and out, it may be simpler to use STUN. The tradeoff is that the POLLs will traverse the WAN using a bit of bandwidth.

Rgds, Dan

Re: Can 2500 do SDLC?

vzops — Wed, 20 Mar 2002 20:08:56 GMT

hello dmccullo,

Does Cisco do group polls?

Thanks,

Steve