topic Re: Dashboard Throughput in Cloud Networking Platform

Dashboard Throughput

Tazio4436 — Wed, 09 Dec 2020 15:24:13 GMT

I have an internet line of 1 G coming from ISP. It goes in to Cisco SW on port 1. Then port 2 of that SW is connected to my Primary MX 100 and port 3 of the same SW to the Secondary MX100.

When I am doing a throughput test on both MX100 I am getting only 280 Mbps.

is this correct?

Thanks for your reply

Tazio

Re: Dashboard Throughput

ww^ — Wed, 09 Dec 2020 15:26:06 GMT

Better connect a client to mx. And use a (reliable) speedtest from there

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Throughput_test_to_the_Cisco_Meraki_Dashboard

Re: Dashboard Throughput

CMR — Wed, 09 Dec 2020 18:00:07 GMT

@Tazio4436 the dashboard throughput is only an indication of functionality. The MXs generally can manage up to a couple of hundred Mbps, the MRs not too far behind but the MSs only 10-20 MBps, if you hover over the (i) it explains that it is just really a connection test:

Re: Dashboard Throughput

Tazio4436 — Thu, 10 Dec 2020 19:59:25 GMT

Thanks a lot.

Regards

Tazio