https://community.cisco.com/t5/cloud-networking-platform/differences-in-client-policy/m-p/5460592#M14344 <P>I am an engineer using Meraki's MS series and MR.<BR />Specifically, I would like to know the difference between "normal" and "blocked" behavior.</P><P>How does it work on the terminal side?<BR />Does applying the policy remove the client from the list?</P><P>(I used a translation tool, so I apologize if the English is uncomfortable.)</P> Thu, 02 May 2024 01:09:00 GMT Emma_M 2024-05-02T01:09:00Z https://community.cisco.com/t5/cloud-networking-platform/differences-in-client-policy/m-p/5460592#M14344 <P>I am an engineer using Meraki's MS series and MR.<BR />Specifically, I would like to know the difference between "normal" and "blocked" behavior.</P><P>How does it work on the terminal side?<BR />Does applying the policy remove the client from the list?</P><P>(I used a translation tool, so I apologize if the English is uncomfortable.)</P> Thu, 02 May 2024 01:09:00 GMT https://community.cisco.com/t5/cloud-networking-platform/differences-in-client-policy/m-p/5460592#M14344 Emma_M 2024-05-02T01:09:00Z https://community.cisco.com/t5/cloud-networking-platform/differences-in-client-policy/m-p/5460593#M14345 <P>Normal are policies configured globally on your network, blocked as the name says, it ignores what has been configured and blocks the client.</P><P><A href="https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Blocking_and_Allowing_Clients" target="_blank" rel="noopener nofollow noreferrer">https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Blocking_and_Allowing_Clients</A></P> Thu, 02 May 2024 01:22:26 GMT https://community.cisco.com/t5/cloud-networking-platform/differences-in-client-policy/m-p/5460593#M14345 aleabrahao 2024-05-02T01:22:26Z