topic Re: Error Adding Node to ODL via RESTCONF in Controllers

Error Adding Node to ODL via RESTCONF

brfoster — Mon, 24 Oct 2016 18:59:34 GMT

Team,

I made a script for interfacing with ODL BORON release RESTCONF interface for adding a node. I'm getting an error as shown below. Any idea what is wrong?

(ydk-py-venv) [gibson@rickenbacker yangtesting]$ python addnode_odl.py

hello from Python 2.7.12 (default, Jun 29 2016, 15:48:48)

[GCC 4.4.7 20120313 (Red Hat 4.4.7-17)]

The REST URL is http://192.168.5.101:8181/restconf/config/network-topology:network-topology/topology/topology-netconf/node/controller-config/yang-ext:mount/config:modules

The XML POST body is...

"<module xmlns="urn:opendaylight:params:xml:ns:yang:controller:config">

<type xmlns:prefix="urn:opendaylight:params:xml:ns:yang:controller:md:sal:connector:netconf">prefix:sal-netconf-connector</type>

<name>iosxrv-1</name>

<username xmlns="urn:opendaylight:params:xml:ns:yang:controller:md:sal:connector:netconf">cisco</username>

<password xmlns="urn:opendaylight:params:xml:ns:yang:controller:md:sal:connector:netconf">cisco</password>

<tcp-only xmlns="urn:opendaylight:params:xml:ns:yang:controller:md:sal:connector:netconf">false</tcp-only>

<event-executor xmlns="urn:opendaylight:params:xml:ns:yang:controller:md:sal:connector:netconf">

<type xmlns:prefix="urn:opendaylight:params:xml:ns:yang:controller:netty">prefix:netty-event-executor</type>

<name>global-event-executor</name>

</event-executor>

<binding-registry xmlns="urn:opendaylight:params:xml:ns:yang:controller:md:sal:connector:netconf">

<type xmlns:prefix="urn:opendaylight:params:xml:ns:yang:controller:md:sal:binding">prefix:binding-broker-osgi-registry</type>

<name>binding-osgi-broker</name>

</binding-registry>

<dom-registry xmlns="urn:opendaylight:params:xml:ns:yang:controller:md:sal:connector:netconf">

<type xmlns:prefix="urn:opendaylight:params:xml:ns:yang:controller:md:sal:dom">prefix:dom-broker-osgi-registry</type>

<name>dom-broker</name>

</dom-registry>

<client-dispatcher xmlns="urn:opendaylight:params:xml:ns:yang:controller:md:sal:connector:netconf">

<type xmlns:prefix="urn:opendaylight:params:xml:ns:yang:controller:config:netconf">prefix:netconf-client-dispatcher</type>

<name>global-netconf-dispatcher</name>

</client-dispatcher>

<processing-executor xmlns="urn:opendaylight:params:xml:ns:yang:controller:md:sal:connector:netconf">

<type xmlns:prefix="urn:opendaylight:params:xml:ns:yang:controller:threadpool">prefix:threadpool</type>

<name>global-netconf-processing-executor</name>

</processing-executor>

<keepalive-executor xmlns="urn:opendaylight:params:xml:ns:yang:controller:md:sal:connector:netconf">

<type xmlns:prefix="urn:opendaylight:params:xml:ns:yang:controller:threadpool">prefix:scheduled-threadpool</type>

<name>global-netconf-ssh-scheduled-executor</name>

</keepalive-executor>

</module>"

400

application/xml

<?xml version="1.0" ?>

<error>

<error-type>protocol</error-type>

<error-tag>malformed-message</error-tag>

<error-message>Error parsing input: Content is not allowed in prolog.</error-message>

</error>

</errors>

(ydk-py-venv) [gibson@rickenbacker yangtesting]$

Re: Error Adding Node to ODL via RESTCONF

brfoster — Mon, 24 Oct 2016 19:53:21 GMT

UPDATE

I had extra quotes around the XML body that was causing the POST to fail.

Now, when I query the RESTCONF interface...

http://192.168.5.101:8181/restconf/config/network-topology:network-topology/topology/topology-netconf/node/controller-config/yang-ext:mount/config:modules

<type>x:sal-netconf-connector</type>

<name>iosxrv-1</name>

<tcp-only>false</tcp-only>

<event-executor>

<type>x:netty-event-executor</type>

<name>global-event-executor</name>

</event-executor>

<keepalive-executor>

<type>x:scheduled-threadpool</type>

<name>global-netconf-ssh-scheduled-executor</name>

</keepalive-executor>

<sleep-factor>1.5</sleep-factor>

<max-connection-attempts>0</max-connection-attempts>

<dom-registry>

<type>x:dom-broker-osgi-registry</type>

<name>dom-broker</name>

</dom-registry>

<client-dispatcher>

<type>x:netconf-client-dispatcher</type>

<name>global-netconf-dispatcher</name>

</client-dispatcher>

<concurrent-rpc-limit>0</concurrent-rpc-limit>

<schema-cache-directory>schema</schema-cache-directory>

<between-attempts-timeout-millis>2000</between-attempts-timeout-millis>

<connection-timeout-millis>20000</connection-timeout-millis>

<username>cisco</username>

<password>cisco</password>

<processing-executor>

<type>x:threadpool</type>

<name>global-netconf-processing-executor</name>

</processing-executor>

<binding-registry>

<type>x:binding-broker-osgi-registry</type>

<name>binding-osgi-broker</name>

</binding-registry>

<keepalive-delay>120</keepalive-delay>

<default-request-timeout-millis>60000</default-request-timeout-millis>

<reconnect-on-changed-schema>false</reconnect-on-changed-schema>

</module>

However, when I open DLUX and select "nodes" I do not see the element listed.

Re: Error Adding Node to ODL via RESTCONF

brfoster — Tue, 25 Oct 2016 23:30:31 GMT

UPDATE

I examined the logs for ODL (data/logs/karaf.log) and I can see ODL is trying to make a NETCONF connection but it is having trouble retrieving the YANG schema. Does IOS-XR support this? I didn't have this issue with the Beryllium release.

Error reply from remote device, request: <rpc message-id="m-85" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<get-schema xmlns="urn:ietf:params:xml:ns:yang:ietf-netconf-monitoring">

<identifier>Cisco-IOS-XR-lpts-pre-ifib-oper-sub1</identifier>

</get-schema>

</rpc>

, response: <rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="m-85">

<rpc-error>

<error-type>application</error-type>

<error-tag>operation-failed</error-tag>

<error-severity>error</error-severity>

</rpc-error>

</rpc-reply>

RemoteDevice{iosxrv-1}: YANG schema was not successfully retrieved for RevisionSourceIdentifier [name=Cisco-IOS-XR-lpts-pre-ifib-oper-sub1@2016-02-22]. Errors: [RpcError [message=, severity=ERROR, errorType=APPLICATION, tag=operation-failed, applicationTag=null, info=, cause=null]]

Unable to build schema context, unsatisfied imports {RevisionSourceIdentifier [name=cisco-xr-netconf-monitoring-deviations@2016-02-16]=[ModuleImportImpl [name=ietf-netconf-monitoring, revision=null, semanticVersion=0.0.0]], RevisionSourceIdentifier [name=Cisco-IOS-XR-ha-eem-policy-oper@2016-02-05]=[ModuleImportImpl [name=Cisco-IOS-XR-ha-eem-policy-oper-sub1, revision=2016-02-05

Re: Error Adding Node to ODL via RESTCONF

brfoster — Wed, 26 Oct 2016 19:09:51 GMT

Just tried with Beryllium and same issue

RemoteDevice{iosxrv-1}: YANG schema was not successfully retrieved for SourceIdentifier [name=Cisco-IOS-XR-lpts-pre-ifib-oper-sub1@2016-02-22]. Errors: [RpcError [message=, severity=ERROR, errorType=APPLICATION, tag=operation-failed, applicationTag=null, info=, cause=null]]

Re: Error Adding Node to ODL via RESTCONF

giheron — Wed, 19 Apr 2017 15:47:19 GMT

what release of XRv are you using? That can sometimes be an issue...