Running IOS commands via RESTAPI leveraging python3 on Cisco SBC Router / SBC

RishikulSaxena18768 — Tue, 26 Jan 2021 12:55:29 GMT

Hello,

We have a Cisco SBC router to make and receive telephone calls.

SBC is running load "isr4300-universalk9.16.06.07.SPA.bin".

I want to run IOS command, 'show call active voice compact' using python3 program off the box.

I have researched the link -

other details about GSAPI XCC interface.

What would be the best approach here and is there an example I could follow ?

Thanks,

Re: Running IOS commands via RESTAPI leveraging python3 on Cisco SBC Router / SBC

bigevilbeard — Thu, 28 Jan 2021 09:55:33 GMT

Hello @RishikulSaxena18768 there is a number of Python libraries you can use here, to send CLI commands to your device. Take a look at this code sample of Netmiko https://developer.cisco.com/codeexchange/github/repo/bigevilbeard/Basic_NetMiko - you can adjust the destination device, show command etc...

Hope this helps.