topic Re: VLAN Management via SNMP on CBS350-16T-2G in Controllers

VLAN Management via SNMP on CBS350-16T-2G

o0oinsomniao0o — Mon, 13 Jun 2022 11:18:54 GMT

Hello,

could you please provide some snmpset commands to add, modify and delete vlan table entries on CBS350-16T-2G switches?

I can create VLAN

SNMPv2-SMI::mib-2.17.7.1.4.3.1.5.3 = INTEGER: 4 (create and go)

SNMPv2-SMI::mib-2.17.7.1.4.3.1.1.3 = STRING: "vlan3" (vlan name)

to add port 3 to vlan3 I used this OID's but it doesn't work

SNMPv2-SMI::mib-2.17.7.1.4.3.1.2.3 = Hex-STRING: “0x20” (This is bit map representation of ports on device in HEX format, and have to fill something even for 0)

SNMPv2-SMI::mib-2.17.7.1.4.3.1.3.3 = Hex-STRING: “0x00” (This field has the same definition as static field)

SNMPv2-SMI::mib-2.17.7.1.4.3.1.4.3 = Hex-STRING: “0x20” (This field has the same definition as static field)

Thanks

Re: VLAN Management via SNMP on CBS350-16T-2G

balaji.bandi — Mon, 13 Jun 2022 12:12:03 GMT

check this thread may help you :

https://community.cisco.com/t5/small-business-switches/vlan-management-via-snmp-on-sg300-10-switches/td-p/1766267

Re: VLAN Management via SNMP on CBS350-16T-2G

o0oinsomniao0o — Mon, 13 Jun 2022 15:37:44 GMT

don't work for CBS350

Re: VLAN Management via SNMP on CBS350-16T-2G

balaji.bandi — Tue, 14 Jun 2022 09:26:31 GMT

They are same SMB switches, if not working, contact Cisco SMB TAC see if that supported what you looking to do.