topic Re: NETMIKO to cisco in Network Devices

NETMIKO to cisco

Dhikra Marghli — Mon, 08 May 2023 18:32:27 GMT

Hello

I wantto use language python Netmiko to add some commands to 400 router cisco !!

for me it the first time i use pyhon Netmiko

i have switch layer 2 2960 cisco have username admin and password admin123

enbale secret admin123

so i want to add command snmp to 400 switch cisco

so i want to test two switch cisco

so what's the scrpit correct can i add command SNMP to two switch ??

iwait a reply from expert Python

Thanks

Re: NETMIKO to cisco

Dhikra Marghli — Fri, 24 Jun 2022 08:32:08 GMT

I try to write exmple

from netmiko import ConnectionHandler

cat2960 ={
"device_type":"cisco_ios",
"ip":"10.20.20.2",
"username":"cisco",
"password":"cisco",
"secret":"sotetel123",
}
net_connect = ConnectHandler(**cat2960)
net_connect.enable()
ouput = net_connect.send_command("show vlan")
print(output)
for vlan in range(10,51,10):
config_commands = ["vlan" +str(vlan),"name Netmiko_vlan"+str(vlan)]
ouput = net_connect.send_config_set_commands
print (ouput)

ouput = net_connect.send_command("show vlan")
print(output)

========>

Traceback (most recent call last):
File "C:/python/Python310/ssh.py", line 1, in <module>
from netmiko import ConnectionHandler
ImportError: cannot import name 'ConnectionHandler' from 'netmiko' (C:\python\Python310\lib\site-packages\netmiko\__init__.py)

how i can resolve this error message !

Thanks

Re: NETMIKO to cisco

Seb Rupik — Fri, 24 Jun 2022 10:19:21 GMT

Hi there,

Have your tried:

pip install netmiko

cheers,

Seb.

Re: NETMIKO to cisco

Dhikra Marghli — Fri, 24 Jun 2022 10:21:22 GMT

yes i put this comand in cmd

Re: NETMIKO to cisco

Seb Rupik — Fri, 24 Jun 2022 12:28:38 GMT

You had some typos and incorrect syntax, try the following:

from netmiko import ConnectHandler

cat2960 = {
    "device_type":"cisco_ios",
    "ip":"10.20.20.2",
    "username ":"cisco",
    "password":"cisco",
    "secret":"sotetel123"}

net_connect = ConnectHandler(**cat2960)
net_connect.enable()
output = net_connect.send_command("show vlan")
print(output)
for vlan in range(10,51,10):
  config_commands = ["vlan" +str(vlan),"name Netmiko_vlan"+str(vlan)]
  output = net_connect.send_config_set_commands
  print (output)

output = net_connect.send_command("show vlan")
print(output)

cheers,

Seb.