topic Re: Cisco IP phone is not registering on webex control hub. in Webex Calling

Cisco IP phone is not registering on webex control hub.

Netplace Support — Mon, 09 Dec 2024 06:33:19 GMT

Hi Team,

I am trying to register Cisco ip phone 7821-k9 v3 on webex control hub to the user for webex calling.

The phone is migrated to MPP and earlier it was registered and working, but for some reason it was offline for more than 60 days and the device was showing "expired" status on the control hub. So, I had deregistered the device and did the factory reset, but after trying again for registration entering the activation code, device gives msg on display "Verify the internet connection or contact your administrator" and shows status of "Activating" on webex control hub.

Request you to provide the solution, as I am not able to do it for other phones also.

Thanks and Regards,

Kush Koli

Re: Cisco IP phone is not registering on webex control hub.

John Steele — Mon, 09 Dec 2024 13:38:14 GMT

here's what i would try.

1. delete the phone in control hub

2. do a migration task, adding mac address only

3. add phone by mac address

4. Enter “#000” as activation code (if being asked) or factory reset

Re: Cisco IP phone is not registering on webex control hub.

kushkoli — Thu, 19 Dec 2024 10:32:33 GMT

Hi,

It worked, thank you for the solution.