Add certificate to WebEx Room Navigator for configuring 802.1x

lzhu — Fri, 11 Feb 2022 17:20:17 GMT

I need to enable 802.1x on some of the webex room navigators using certificates(they are not connected to their codecs directly. Instead they are connector to the LAN and then paired with their codecs). Looks like the webex room navigator supports 802.1x but I am not sure how i can generate and add certificates to them. Has anyone here done this before? Thanks.

Re: Add certificate to WebEx Room Navigator for configuring 802.1x

Igor Lukic — Fri, 11 Feb 2022 20:55:59 GMT

Hi @lzhu,

according to this help article it is possible to upload the certificate via API prior to the Room Navigator being paired with the VC system:

https://help.webex.com/en-us/article/q6pgjeb/Configure-802.1x-Authentication-on-the-Webex-Room-Navigator

I haven't done it myself, but I assume that the relevant command is:

xapi.Command.Security.Certificates.Services.Add(
    { PrivateKeyPassword: value }, 'Raw data here...');

Please refer to: https://roomos.cisco.com/xapi/Command.Security.Certificates.Services.Add/

Best regards,

Igor

topic Add certificate to WebEx Room Navigator for configuring 802.1x in Webex Devices

Add certificate to WebEx Room Navigator for configuring 802.1x

Re: Add certificate to WebEx Room Navigator for configuring 802.1x