topic Re: IR1101 Application Hosting: GOOSE protocol in Edge Computing Infrastructure

IR1101 Application Hosting: GOOSE protocol

Andre Chrcanovic — Wed, 17 Feb 2021 14:06:38 GMT

Hi, everyone.

I can generate, deploy, activate and run the my own Docker type C based application on the IR-1101, and this application works correctly using the IP protocol. But a requirement of this application is to run a GOOSE subscriber to receive events from IEDs.

As GOOSE is a Layer 2 protocol, i.e., messages are transported over Ethernet (the Ethertype field is set to 0x88B8), how to configure IR1101 so that the GOOSE packet is somehow routed to the container? Note that the GOOSE stack implementation uses raw sockets to receive raw GOOSE packets.

Thanks in advance.

Andre Chrcanovic

Re: IR1101 Application Hosting: GOOSE protocol

Alexander Stevenson — Tue, 09 Aug 2022 01:16:00 GMT

Hello,

From what I've found, the IR1101 can be configured to forward these Layer-2 GOOSE messages with IEDs.

Source: Distribution Automation—Secondary Substation Design Guide, found here (PDF) and here (online Docs)

Re: IR1101 Application Hosting: GOOSE protocol

mihneaMarin — Fri, 22 Nov 2024 11:50:30 GMT

Hello,

Did you manage to configure the IR1101 in order to enable Layer 2 transmission to the IOx?