topic VG450 Mounting Bracket in Accessories

VG450 Mounting Bracket

getdan — Thu, 08 Jul 2021 18:13:15 GMT

Does anybody know the part number for the mounting brackets for a VG450, Cisco doesn't know and i can't find them anywhere online. Any help would be appreciated.

Re: VG450 Mounting Bracket

Sadav Ansari — Fri, 09 Jul 2021 02:19:59 GMT

Kindly check below link I hope it will provide all information.

https://content.cisco.com/chapter.sjs?uri=/searchable/chapter/content/en/us/td/docs/routers/access/vg450/hardware/installation/guide/b_Vg450_hig/b_Vg450_hig_chapter_010.html.xml

Pls rate if its “Helpful”. If this answered your question please click “Accept as Solution”.

Re: VG450 Mounting Bracket

Nithin Eluvathingal — Fri, 09 Jul 2021 05:06:09 GMT

Those comes with the box.

For 19 " use below.

ACS-4450-RM-19=

For 23" use below.

ACS-4460-RM-23=

Re: VG450 Mounting Bracket

getdan — Fri, 09 Jul 2021 13:32:18 GMT

Yeah they got misplaced, unfortunately these are not the correct one. I called Cisco and they couldn't even help me.

Re: VG450 Mounting Bracket

Nithin Eluvathingal — Fri, 09 Jul 2021 14:19:50 GMT

Asper the description On CCW. those are for 4k series rack mount. AFAIK VG450 is ISR 4k series.

Re: VG450 Mounting Bracket

Henry Pinera — Fri, 29 Oct 2021 19:22:26 GMT

Unfortunately, Cisco does not sell those parts standalone. The parts that were designated as ACS-4450-RM-19= won't work as those correspond to the 4451 which is a 2U router. The VG450 is based on the 4461 which is a 3U router. I have searched vigorously and have not been able to find alternative rack mount ears. Please let me know if you have found an alternative.

Re: VG450 Mounting Bracket

Andy Phillips — Thu, 02 Jun 2022 20:29:13 GMT

Just looking at this thread I was able to find the following and add them to a config in CCW:

19" - ACS-4460-RM-19=
23" - ACS-4460-RM-23=

I think that Nithan had just mistyped the 4450 rather than the 4460 which the VG450 is based upon.