topic Voice message waiting icon not showing until Jabber is closed/re-opened in Collaboration Applications

Voice message waiting icon not showing until Jabber is closed/re-opened

hoffmann74 — Mon, 18 Mar 2019 00:46:38 GMT

We are having an issue with Jabber (10.6 and 11.1.1 also we are on Unity 9.1.2 and a Windows 7 environment.) where when someone receives a voicemail, the indicator icon (red with a 1) and voicemail itself do not show up in Jabber. As soon as Jabber is closed and re-opened however, the icon and voicemail show up.

I've only found this bug for it - https://tools.cisco.com/bugsearch/bug/CSCue50882 but it is for 10.0(1)says no fix planned and I have not found others reporting having the same issue.

The bug is for the DX series,

Jaime Valencia — Wed, 06 Jan 2016 18:06:26 GMT

The bug is for the DX series, I've had no problem with VM notification and I've used plenty of releases in my lab. Does it show the VMREST connection to CUC to be OK??

Are they in the same network??

They are in the same network.

hoffmann74 — Wed, 06 Jan 2016 18:35:16 GMT

They are in the same network. When I go to Connection Status in Jabber, it shows no issues with the VMREST and has a status of 'Connected.'

Softphone - Healthy
Status: Connected
Protocol: SIP
Address: 10.xx.1.11 (CCMCIP)
Device:CSFmhoffmann
Line:3324

Deskphone - None
Status: Not connected
Protocol: CTI
Address: 10.xx.1.11 (CTI)

Deskphone Video - Informational
Status: Unavailable
Reason:Deskphone video is not available in softphone mode.

Voicemail - Healthy
Status: Connected
Address: 10.xx.1.13
Port: 443
Protocol: VMREST (HTTPS)

Presence - Healthy
Status: Connected
Address: 10.xx.1.15
Protocol: XMPP
Port: 5222

Outlook address book - Healthy
Status: Last connection successful.
Protocol: MAPI
Address: Outlook

Directory - Healthy
Status: Last connection successful.
Address: 10.xx.1.11
Protocol: UDS (HTTPS)

If you have a physical phone

Jaime Valencia — Wed, 06 Jan 2016 18:38:35 GMT

If you have a physical phone with a shared line, does it properly lit the MWI??

Yes. No issues with deskphone

hoffmann74 — Wed, 06 Jan 2016 18:40:11 GMT

Yes. No issues with deskphone MWI's.

As you mention, this is not a

Jaime Valencia — Wed, 06 Jan 2016 19:03:02 GMT

As you mention, this is not a common problem, I couldn't find a lot while searching internally. I'd doublecheck all the settings required for Jabber to work properly are configured in CUC and check the VM config for Jabber.

You might want to reach TAC for further assistance to look at a PRT and VMREST logs to find out what might be the problem.

OK. I appreciate your looking

hoffmann74 — Wed, 06 Jan 2016 19:40:04 GMT

OK. I appreciate your looking into it.

Possibly these two?

Md Hasan — Thu, 07 Jan 2016 16:24:37 GMT

Possibly these two?

https://tools.cisco.com/bugsearch/bug/CSCut78172

https://tools.cisco.com/bugsearch/bug/CSCuo46274

Thanks. I will try the CUC 9

hoffmann74 — Thu, 07 Jan 2016 16:43:28 GMT

Thanks. I will try the CUC 9.1(2) SU4 update and see if that resolves the issue.

Hello,

Siemmina — Thu, 13 Oct 2016 13:15:20 GMT

Hello,

we have an issue with voice messagge notification icon on our Jabber (version 11.6.1)

the voice message notification (the red icon that notificate that there is a message on voicemail) work properly on our DX, but on our Jabber Mobile in a shared line the notification icon doesn't work and when we call the VoiceMail on Jabber we found voice messanges.

CUC version 11.5.

Thanks.