topic I'm referring to click to in Collaboration Applications

Jabber for Windows - Can't dial external numbers

cowetacoit — Sun, 17 Mar 2019 23:21:25 GMT

Due to having to dial a 9 for external calls, Jabber is unable to make external calls. Does anyone know how to force the Jabber client to use a 9?

Not following here, you can

Jaime Valencia — Fri, 25 Jul 2014 01:03:23 GMT

Not following here, you can dial 9 plus any number in J4W, on that regards, it's no different from any hard phone, CSS and partitions define what you can dial and reach.

I'm referring to click to

cowetacoit — Fri, 25 Jul 2014 01:30:26 GMT

I'm referring to click to call. For example a user has a cell phone or an external user has an office phone. When I click to call it fails. I can type a full number with 9 in the top jabber bar and it's fine.

Configure application dial

Jaime Valencia — Fri, 25 Jul 2014 01:33:57 GMT

Configure application dial rules to add the 9 or whatever digit manipulation you may need.

If you're on CUCM 8.5 or

Jonathan Schulenberg — Sat, 26 Jul 2014 22:58:57 GMT

If you're on CUCM 8.5 or lower (your post doesn't specify), Don't forget to run the Application Dial Rule COP file afterward to get the database records you created via /ccmadmin into an XML file on TFTP that Jabber can read.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/JABW_BK_C4D2F1D0_00_cisco-jabber-for-windows-97/JABW_BK_C4D2F1D0_00_cisco-jabber-for-windows-97_chapter_0111.html#JABW_TK_P784100A_00