MPE backup

sindan — Sun, 17 Mar 2019 23:26:49 GMT

How to reduce the backups from 4 days to 3 days in Meeting Place Express 2.1.1?

Hi,Backup retention is set to

dpetrovi — Wed, 03 Sep 2014 19:24:19 GMT

Hi,

Backup retention is set to 7 days. At one time, you always have 2x Level 0 backups which are being collected every 4 days, while in between you are getting Level 1 and Level 2 backups.

There is no supported way of changing this time. This is configured in a specific file, but you will have to take responsibility of making those changes and any potential consequences. The product is already End of Support, so you won't be able to reach out to TAC if you hit any issues.

Keep in mind that if you have disk space issues, there are different ways to approach freeing up disk space. If you haven't done so already, please, take a look at this article first and clean disk space. You can also check this TechZone post as well.

If nothing here results in increase of disk space, you can proceed with editing the config file, but again, I don't think that is a good idea and it is definitely not supported procedure.

1. SSH to MPE server

2. Log in as ‘mpxadmin’

3. Change to ‘root’

$ su

Enter ‘root’ password

4. Browse to this location:

# cd /opt/cisco/meetingplace_express/database/db-maintenance/

5. Backup the existing settings file

# cp settings settings.old

6. Edit the settings file to set backup expiration:

# vi settings

This will open a file in VI editor, and the content of the file looks like this:

log_folder=$MP_DATABASE/db-maintenance/logs

log_file_name=$log_folder/db-maintenance.log

backup_expiration=7

backup_location=$MP_BACKUP_DIR/compressed_backup

a) Scroll down to backup_expiration line, and press ‘i’ to enter the INSERT mode

b) Once in INSERT mode, move the cursor to the right of ‘=’ sign and use Delete key to delete the entry “7”, and then type the desired backup retention period

c) Press ESC key to exit INSERT mode

d) Type the following to save the changes and exit VI client:

:wq!

7. Now that you edited the file, just verify the changes were saved successfully:

# cat settings

You may need to delete the older files manually at first, but after that I believe Backup process should automatically purge backup files older than 4 or whatever number of days you specified.

I hope this helps.

-Dejan

topic Hi,Backup retention is set to in Collaboration Applications

MPE backup

Hi,Backup retention is set to