topic Hi Helmi, Public VIP must be in Collaboration Applications

Ask about CWMS 2.0 IRP Design

Helmi Muzammil — Sun, 17 Mar 2019 23:05:25 GMT

Hi All,

I want to ask about IRP Design in CWMS 2.0

At our customer site, there is a policy that from DMZ(using IP public) subnet cannot access the internal network subnet.

And i am going to deploy IRP, which in the server planning guide said that both IRP real IP address and Public virtual IP must be on the same subnet.

Because of the company policy, can i use a different subnet between the Public and the Real IP address of the IRP?

Thanks,

Helmi

dpetrovi — Tue, 08 Apr 2014 16:00:48 GMT

Hi Helmi,

Here you can find all the available options for deploying CWMS with IRP.

I hope this documentation will be of help.

-Dejan

Helmi Muzammil — Wed, 16 Apr 2014 08:45:53 GMT

Hi Dejan,

Thanks for your help.

as per networking topology design, maybe i use " Installation with Manual Deployment, Public Access, and a Split-Horizon DNS "

but the requirement said :

in the 9th point. can i use a different subnet between webex site URL ( Public VIP address ) and Real IRP IP?

Thanks

dpetrovi — Wed, 16 Apr 2014 15:13:42 GMT

Hi Helmi,

Public VIP must be on the same subnet as your IRP IP address.

-Dejan