topic Re: CWMS call using computer problem in Collaboration Applications

CWMS call using computer problem

hyacinthzhu — Thu, 25 Apr 2019 07:57:17 GMT

Dear,

We have met a wired problem about CWMS. When users enter into a webex meeting and connect audio using computer, it will take a long time to connect or cannot hear anything after connecting. If we exit the meeting and connect again, or set up a new meeting, it may become normal.

My CWMS information is as follows:

version: 3.0.1.2131

server: Admin + Media + IRP (single)

support 250 users

Is there anyone met the similar problem before and provide any advice ?

Re: CWMS call using computer problem

Ratheesh Kumar — Thu, 25 Apr 2019 15:20:03 GMT

Hi there

I am curious to know if you are hitting this defect CSCur27821

When an end user joins a meeting, after 10 minutes, it experiences one-way audio and needs to hang up and join the meeting again. No audio comes from CWMS, but audio from the end point is heard on CWMS side.

This is caused by RTP audio port change by the end point during SIP refresh that takes place every 10 min.

When CWMS sends SIP INVITE during SIP refresh on a 10min interval and the end point responds with the 200OK, but in that OK message it changes the RTP

Known Fixed Releases: 0

Release Pending

My suggestion leads to a TAC call

Hope this Helps

Cheers
Rath!
***Please rate helpful posts***

Re: CWMS call using computer problem

hyacinthzhu — Fri, 26 Apr 2019 02:31:29 GMT

Dear Ratheesh Kumar,

I think that's not the "10 minutes interval" problem.

What I have met is that:

-It take a long time to connect audio by computer or mobile webex app

-cannot connect audio by computer or mobile webex app at the first time with error popup(no error code, just prompt: try again or try other ways)

-there is no voice after connecting audio by computer or app at the first time

if try to connect again, everything becomes normal.

It happened casually and confused users. They complained to me: you need luck to finish a webex meeting without problem......

Re: CWMS call using computer problem

navneet.sharma — Wed, 11 Dec 2019 03:39:30 GMT

Hi Hyacinthzhu,

We are also facing the same issues with CWMS system wherein it takes a long time to connect audio by computer or mobile webex app. Users have to try 3 to 4 times in order to get connected with PC audio. It happens intermittently and many users have started reporting it now.

Did you have any luck in fixing the issue?

If yes, can you please let me know what was done to fix it.

Regards,

Navneet Sharma

Re: CWMS call using computer problem

hyacinthzhu — Wed, 11 Dec 2019 07:01:31 GMT

Yes, please try to restart cwms admin/media/irp servers, it will fix the issue.

I don't know the reason, but it's the only way I have found.

Waiting for your feedback.