topic Re: Jabber 12 Command line call in Collaboration Applications

Jabber 12 Command line call

NicolaAlmeno1508 — Fri, 28 Jun 2019 13:23:41 GMT

Hi,

I need to know the command line parameters to do a call in Cisco Jabber 12. In the version 4.8 i can do it with put the id in command parameter.

Help me please

Re: Jabber 12 Command line call

Jaime Valencia — Fri, 28 Jun 2019 15:24:08 GMT

I've never seen that as an option, I don't believe that exists, there was no Jabber version 4.8, you're probably talking about a different product or that's a typo.

Re: Jabber 12 Command line call

NicolaAlmeno1508 — Fri, 28 Jun 2019 15:36:20 GMT

this is my old version of jabber. With this version i can call with command line parameters

Re: Jabber 12 Command line call

Vaijanath Sonvane — Fri, 28 Jun 2019 15:45:00 GMT

Only commands that I have seen for Cisco Jabber (not referring to Cisco Jabber Video for TelePresence) is to specify arguments in a Windows CLI to set installation properties. Personally, I have never seen commands to execute a phone call from Cisco Jabber using CLI.

Re: Jabber 12 Command line call

Vaijanath Sonvane — Fri, 28 Jun 2019 15:44:00 GMT

Cisco Jabber Video for TelePresence (Movi) is end of life and end of support.

Re: Jabber 12 Command line call

Jaime Valencia — Fri, 28 Jun 2019 16:08:43 GMT

That is pretty much a whole different product which offered several things that the current Jabber doesn't even have (and worked with other options as call control), and as mentioned, it's EOS/EOL.

Current Jabber options which are shipping and supported do not have CLI options to make calls.

Re: Jabber 12 Command line call

Jonathan Schulenberg — Sun, 30 Jun 2019 19:26:35 GMT

Take a look at protocol handlers as an alternative.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/12_6/cjab_b_on-prem-deployment-cisco-jabber_12-6/cjab_b_on-prem-deployment-cisco-jabber_12-6_chapter_010011.html#JABW_TP_PF21EDAF_00

Re: Jabber 12 Command line call

NicolaAlmeno1508 — Mon, 01 Jul 2019 07:34:45 GMT

now I take a look and let me know. Thank you

Re: Jabber 12 Command line call

Sergio Quezada — Sat, 13 Jul 2019 22:29:33 GMT

Its been awhile for movi but.... Here is what I found:

Calling an IP Address with Jabber (movi)- https://www.cisco.com/c/en/us/td/docs/telepresence/endpoint/articles/cisco_telepresence_movi_call_ip_address_kb_472.html

- To call an IP address, use the format jabbervideo@. For example, to call an endpoint registered to the IP address 10.47.27.27, dial jabbervideo@10.47.27.27

- Note: Some endpoints require a username when they receive a call. To call these endpoints, use the format @, where is the username of the person you are calling.

Re: Jabber 12 Command line call

NicolaAlmeno1508 — Mon, 15 Jul 2019 09:46:52 GMT

there is a method to close a call with this parameter? Now I need to close without using the close button of jabber video

Re: Jabber 12 Command line call

rhungerford — Sun, 17 Oct 2021 20:04:34 GMT

If any one was searching this jabber command line topic for stream deck, the other guy put up a helpful link.

You have to set up the button as a website and put in as CISCOTEL:(then your number here)

This worked like a champ for me, as soon as I push the button my computer and 8811 dialed out to my cell

My purpose was to make the stream deck like a side car on a desk phone, just nicer because its closer to the keyboard

Also another hint on also adding a persons direct email button --put it in as mailto:(email address here)

I just made the top icons on stream deck their face and the 3 buttons below email, desk phone and cell phone