topic Re: CMS LDAP integration in Collaboration Applications

CMS LDAP integration

Ali Alqwasmi — Mon, 02 Dec 2019 11:13:44 GMT

I am facing issue with CMS integration with LDAP. I tried from Postman and from the CMS GUI.. it seems that the active directory service account is working, but there is something wrong with filters or the mapping.... any advice would be highly appreciated.

Re: CMS LDAP integration

tgaur — Wed, 04 Dec 2019 06:28:12 GMT

Hi,

What all information you POST on CMS, have you used any mapping? moreover i think it could be some typo error.

Please follow :https://kb.acano.com/content/21/275/en/why-does-my-ldap-sync-fail-with-has-blank-mapped-jid-__-abandoning-sync.html

also : https://cmslab.ciscolive.com/pod4/API/ldap

Regards
Tarun

Re: CMS LDAP integration

Ali Alqwasmi — Thu, 05 Dec 2019 07:10:46 GMT

Hi Tgaur

i have accessed these links earlier, but no luck

Re: CMS LDAP integration

tgaur — Thu, 05 Dec 2019 08:24:22 GMT

hi,

the purpose of sending the links was to tell that the issue is with the config you used to integrate the LDAP, please check it. if you think everything is good send the following :

get https://XXX/xx/xx/ldapservers
get https://XXX/xx/xx/ldapmappings
get https://XXX/xx/xx/ldapSources

Regards
Tarun

Re: CMS LDAP integration

Ali Alqwasmi — Mon, 16 Dec 2019 05:16:46 GMT

Hi...

Sorry for the late reply... please find the attached screenshots for the ldap config on Postman

Re: CMS LDAP integration

Anurag Srivastava1 — Mon, 16 Dec 2019 10:34:09 GMT

Hello,

The filter you have applied in ldapsources is wrong.

It should be the folder path from where you are syncing the users.for example" "memberof=CN=CMS,CN=users,DC=example,DC=com ""

Else mapping looks fine to me.

Thanks

Please rate if it is helpful and mark as accepted solution if applicable...