topic Re: CUCM and TEAMS in Collaboration Applications

CUCM and TEAMS

asmlicense — Wed, 22 May 2019 13:25:42 GMT

Dear all,

We wants to use Windows Teams on cloud and CUCM on premise. How can we integrate it?

Thanks in advance

Re: CUCM and TEAMS

Ratheesh Kumar — Wed, 22 May 2019 14:44:20 GMT

Hi there

I don't think there is a readily available integration document for Cisco UC and MS Teams. The ability to deliver fully call-enabled Microsoft Teams clients in coordination with Cisco services is enabled by the Microsoft Direct Routing capability and corresponding Session Border Controller (SBC). This allows the Microsoft Teams clients to utilize the Cisco UC estate for communications with devices as well as PSTN connectivity.

Unfortunately, you have dig into more details on how to set up these.

Some good info for you

https://techcommunity.microsoft.com/t5/Microsoft-Teams-Blog/Direct-Routing-enables-new-enterprise-voice-options-in-Microsoft/ba-p/170450

https://techcommunity.microsoft.com/t5/Microsoft-Teams-Blog/Direct-Routing-is-now-Generally-Available/ba-p/210359

https://docs.microsoft.com/en-us/microsoftteams/direct-routing-plan

Hope this Helps

Cheers
Rath!
***Please rate helpful posts***

Re: CUCM and TEAMS

soukainab — Fri, 02 Aug 2019 12:54:44 GMT

Hello,

I need to intregate Microsoft teams to Cisco on-premise. There is any way to make it?

Thank you.

Regards,

Re: CUCM and TEAMS

Larry Roberson — Tue, 15 Oct 2019 03:47:04 GMT

Hey, I am looking for a general guide to hook CUCM to TEAMS server. Is it as easy as creating a SIP trunk to TEAMS ?

Re: CUCM and TEAMS

harris.h — Tue, 15 Oct 2019 09:51:51 GMT

Hi there, did you get an answer on this, we too are looking at this as a solution

Re: CUCM and TEAMS

pvarenholt — Tue, 15 Oct 2019 13:10:15 GMT

Can you provide a bit more insight on this please?

Wondering if you were able to get calling working between MS & Cisco via SIP trunk?

Were you able to get any other features/functions working?

What the the end user experience like?

Thanks,

Paul.

Re: CUCM and TEAMS

trayb83 — Thu, 17 Oct 2019 20:40:24 GMT

I am in the process of setting up a Ribbon SBC in between Teams and CUCM now. Looks like a fairly easy setup. I'll post any gotcha's we encounter.

Re: CUCM and TEAMS

Larry Roberson — Thu, 17 Oct 2019 20:55:38 GMT

I am hoping to use and CUBE or Cisco SBC. But I would prefer a direct SIP trunk from CUCM to TEAMS. My question is how the extensions handled or is this just mainly for PSTN routing?

Re: CUCM and TEAMS

tee-mann1 — Thu, 17 Oct 2019 21:04:15 GMT

Good luck

Re: CUCM and TEAMS

tee-mann1 — Thu, 17 Oct 2019 21:05:20 GMT

We use same 4 digit extensions for both Teams & Cucm.

We have Ribbon SBC working in between our cucm and sip trunk.

Re: CUCM and TEAMS

tee-mann1 — Thu, 17 Oct 2019 22:45:39 GMT

Just like cucm

You can use the same extensions for both systems

Re: CUCM and TEAMS

tee-mann1 — Thu, 17 Oct 2019 22:46:12 GMT

Good luck to you.

Re: CUCM and TEAMS

tee-mann1 — Thu, 17 Oct 2019 22:48:45 GMT

Easy - you need smart consultants who can do CLI programming on Microsoft side.

A free tip - you need to program CUCM, Microsoft Teams, Your SIP trunk box (may be your Cisco voice gateway router), and the SBC (Session Border Controller); Ribbon SBC works now.

We have Teams clients working on Iphone, Android phones and desktops.

We can make Teams and PSTN calls from both sides.

aguha at dccil dot com

Re: CUCM and TEAMS

tee-mann1 — Thu, 17 Oct 2019 22:49:16 GMT

Easy - you need smart consultants who can do CLI programming on Microsoft side.

A free tip - you need to program CUCM, Microsoft Teams, Your SIP trunk box (may be your Cisco voice gateway router), and the SBC (Session Border Controller); Ribbon SBC works now.

We have Teams clients working on Iphone, Android phones and desktops.

We can make Teams and PSTN calls from both sides.

Re: CUCM and TEAMS

tee-mann1 — Thu, 17 Oct 2019 22:49:37 GMT

Easy - you need smart consultants who can do CLI programming on Microsoft side.

A free tip - you need to program CUCM, Microsoft Teams, Your SIP trunk box (may be your Cisco voice gateway router), and the SBC (Session Border Controller); Ribbon SBC works now.

We have Teams clients working on Iphone, Android phones and desktops.

We can make Teams and PSTN calls from both sides.

Re: CUCM and TEAMS

mis.network — Sat, 09 Nov 2019 19:30:42 GMT

Is your team do consulting we need the similar solution

@aguha wrote:
We have used an SBC and connected it successfully for our production environment.
Now all our iphones and desktops can make calls using Teams or Jabber.
it was tricky for our CCIE voice engineer with Microsoft expertise.
But it was done.
Let us know.

Re: CUCM and TEAMS

tee-mann1 — Mon, 11 Nov 2019 14:20:03 GMT

Use an SBC, Session Border Controller from Ribbon

Read the manual.

Program the Ribbon SBC to take the SIP trunk.

Get the online manuals for Teams.

Get the online manuals for your CUCM and Voice Gateway.

Then find a CCIE & MCSE engineers who will do this programming.

Takes anywhere between 10 hours to 50-60 hours for an experienced voip programmer.

We were able to do it but paid our CCIE engineer consultant to get it down.

Works really well.

I am sure you will be able to do it.

good luck.

Re: CUCM and TEAMS

tee-mann1 — Mon, 11 Nov 2019 14:21:36 GMT

Use an SBC, Session Border Controller from Ribbon

Read the manual.

Program the Ribbon SBC to take the SIP trunk.

Get the online manuals for Teams.

Works really well.

I am sure you will be able to do it.

good luck.

Re: CUCM and TEAMS

pvarenholt — Tue, 12 Nov 2019 12:35:26 GMT

On the Teams side I'm assuming the E5 license is required correct?
Thankss,
Paul.

Re: CUCM and TEAMS

cisco.service — Wed, 20 Nov 2019 16:26:31 GMT