https://community.cisco.com/t5/cisco-catalyst-center/how-to-clear-inventory-insights-on-dnac/m-p/4903712#M7355 <P>you can ignore those insights but you cannot remove/clear them<BR />you can rediscover/resync your devices&nbsp; and hope this improves the report<BR /><BR />can you tell more on the insights reported ?<BR />the output may be less incorrect than you think<BR /><BR />I've see insights about <STRONG>allowed vlan 1,2</STRONG> does not match<STRONG> allowed vlan 1-2</STRONG><BR />although our <EM>interpretation</EM> of this output is as matching , this is NOT the same in comparison<BR />the process simply compares output of commands and so above output is not equal</P><P>second example is speed and duplex with provider equipment in between (not dark fiber)<BR />speed and duplex on both sides are negotiated with the provider equipment<BR />but CDP and inventory insights checks the state on the end-to-end connection<BR /><BR /></P> Fri, 11 Aug 2023 13:11:12 GMT pieterh 2023-08-11T13:11:12Z https://community.cisco.com/t5/cisco-catalyst-center/how-to-clear-inventory-insights-on-dnac/m-p/4903041#M7353 <P><SPAN>Hi all, Is there a way to clear the Inventory Insights in DNAC? Can this be done through either the (CLI) or&nbsp; (GUI)? I've received incorrect alerts on version 2.3.3.6-70045 and I'm looking a method to remove them.</SPAN></P> Thu, 10 Aug 2023 13:08:02 GMT https://community.cisco.com/t5/cisco-catalyst-center/how-to-clear-inventory-insights-on-dnac/m-p/4903041#M7353 jcp4linux 2023-08-10T13:08:02Z https://community.cisco.com/t5/cisco-catalyst-center/how-to-clear-inventory-insights-on-dnac/m-p/4903712#M7355 <P>you can ignore those insights but you cannot remove/clear them<BR />you can rediscover/resync your devices&nbsp; and hope this improves the report<BR /><BR />can you tell more on the insights reported ?<BR />the output may be less incorrect than you think<BR /><BR />I've see insights about <STRONG>allowed vlan 1,2</STRONG> does not match<STRONG> allowed vlan 1-2</STRONG><BR />although our <EM>interpretation</EM> of this output is as matching , this is NOT the same in comparison<BR />the process simply compares output of commands and so above output is not equal</P><P>second example is speed and duplex with provider equipment in between (not dark fiber)<BR />speed and duplex on both sides are negotiated with the provider equipment<BR />but CDP and inventory insights checks the state on the end-to-end connection<BR /><BR /></P> Fri, 11 Aug 2023 13:11:12 GMT https://community.cisco.com/t5/cisco-catalyst-center/how-to-clear-inventory-insights-on-dnac/m-p/4903712#M7355 pieterh 2023-08-11T13:11:12Z