topic ISE TACACS Command Sets for shut / no shut in Endpoint Security

ISE TACACS Command Sets for shut / no shut

WonderBoy1990 — Tue, 05 Jan 2021 12:15:01 GMT

Hi,

It is possible in ISE to allow a particular group to enter configuration mode but can only do the shutdown and no shutdown? What could be the possible argument for such.

Thanks!

Re: ISE TACACS Command Sets for shut / no shut

Francesco Molino — Wed, 06 Jan 2021 04:21:41 GMT

You can create 2 command set that you will assign based on a AD group.

In the specific command set, you will allow conf t, interface command and shut/no shut.

Is that clear? I could try to do some screenshots with existing ise if needed.

Re: ISE TACACS Command Sets for shut / no shut

WonderBoy1990 — Sat, 16 Jan 2021 03:33:23 GMT

Hi,

This is great! Thank you!