topic Re: Cisco NAC in Endpoint Security

Cisco NAC

swann — Fri, 18 Jun 2021 11:25:44 GMT

Hi everyone,

I know it is not a new technology, but can someone point me to the right direction on how to setup Cisco ISE 3.0 (is that the latest) for Cisco Network Access Control (NAC)? I just want to know the high-level steps.

Also, are Windows and Mac the only ones that can be protected as we can install agents on them? What about POS (Point-of-Sale), PDAs? Is there a way to protect them too?

Appreciated if someone can shed some light on this.

Cheers

Re: Cisco NAC

balaji.bandi — Fri, 18 Jun 2021 11:28:20 GMT

if you can not install supplicant, then only Option you have is MAB (Mac based Authentication)

May be security advise, i would advise these device keep them in different VLAN, so it will be protected some kind of security.

Re: Cisco NAC

swann — Fri, 18 Jun 2021 11:37:30 GMT

Thanks for your reply.

Is there any place you can point me to for high-level setup tasks to configure Cisco ISE to perform NAC function?

Cheers

Re: Cisco NAC

balaji.bandi — Fri, 18 Jun 2021 11:52:35 GMT

Hope below Guide help you (ISE 3.0 is new, but should work as expected)

https://www.cisco.com/c/en/us/td/docs/security/ise/3-0/admin_guide/b_ISE_admin_3_0/b_ISE_admin_30_integration.html

OLD resources :

You might interest in the following sample links on the net: