https://community.cisco.com/t5/endpoint-security/amp-service-not-starting/m-p/5088658#M8342 <P>Do you have any other antivirus products running on the laptop? They can sometimes conflict, especially if they both have in memory protections turned on. If that is the case, try disabling the other one to see if the Secure Endpoint service will start. If it does, you may have to choose a product to do memory protection or add exclusions to both products.&nbsp; If you don't have another AV running, try collecting the associated DMP and opening a TAC case for analysis.</P> <P>Hope that helps,</P> <P>-Matt</P> Fri, 03 May 2024 11:13:23 GMT Matthew Franks 2024-05-03T11:13:23Z https://community.cisco.com/t5/endpoint-security/amp-service-not-starting/m-p/5088603#M8341 <P>I have a laptop which won't start the Amp service.&nbsp; I've updated it from 8.2.1 8.2.4 and still get the same problem.</P><P>The event log gives this:</P><P>Faulting application name: sfc.exe, version: 8.2.4.30130, time stamp: 0x65cfcfa4Faulting module name: sfc.exe, version: 8.2.4.30130, time stamp: 0x65cfcfa4Exception code: 0xc0000005Fault offset: 0x0000000000283985Faulting process ID: 0x1fd0Faulting application start time: 0x01da9d40beeb9924Faulting application path: C:\Program Files\Cisco\AMP\8.2.4.30130\sfc.exeFaulting module path: C:\Program Files\Cisco\AMP\8.2.4.30130\sfc.exeReport ID: 88e6c2b1-c155-4370-bf1e-1150c5e0c11bFaulting package full name: Faulting package-relative application ID:</P><P>Any suggestions?</P> Fri, 03 May 2024 10:26:00 GMT https://community.cisco.com/t5/endpoint-security/amp-service-not-starting/m-p/5088603#M8341 QCaz 2024-05-03T10:26:00Z https://community.cisco.com/t5/endpoint-security/amp-service-not-starting/m-p/5088658#M8342 <P>Do you have any other antivirus products running on the laptop? They can sometimes conflict, especially if they both have in memory protections turned on. If that is the case, try disabling the other one to see if the Secure Endpoint service will start. If it does, you may have to choose a product to do memory protection or add exclusions to both products.&nbsp; If you don't have another AV running, try collecting the associated DMP and opening a TAC case for analysis.</P> <P>Hope that helps,</P> <P>-Matt</P> Fri, 03 May 2024 11:13:23 GMT https://community.cisco.com/t5/endpoint-security/amp-service-not-starting/m-p/5088658#M8342 Matthew Franks 2024-05-03T11:13:23Z