topic TACACS, CLI commands delay in Network Access Control

TACACS, CLI commands delay

karen.melyan — Mon, 11 Mar 2019 03:49:17 GMT

I used some SVI ip address to ssh to cisco switch. After I cteated new management vlan, then set IP address on interface of this vlan and try to connect to this IP address instead of previos IP, some deays appeard between Login/ Password promt and enable/conf t transition. I deleted previos SVI and changed agent IP address in ACS. Averything is worked but there are delays. Could you help me hat is the problem?

TACACS, CLI commands delay

minkumar — Tue, 27 Aug 2013 17:04:50 GMT

Hi Karen,

Could you please share the version of the box.

Minakshi (Do rate the helpful posts)

TACACS, CLI commands delay

Ravi Singh — Wed, 28 Aug 2013 02:28:32 GMT

Please share the box detail as suggested by minkumar and also check that there is no network connectivity break between your devices.

TACACS, CLI commands delay

karen.melyan — Wed, 28 Aug 2013 04:54:11 GMT

Thank you for your responces. I already found problem. My ASA firewall blocked new SVI IP address.

TACACS, CLI commands delay

Amjad Abdullah — Wed, 28 Aug 2013 06:27:23 GMT

Exactly. When there are delays with the command that usually means the ACS is not reachable and it is most likely a connectivity issue between the AAA client and the AAA server (ACS).

Rating useful replies is more useful than saying "Thank you"