ACS Configuration

demele — Fri, 21 Feb 2020 18:04:00 GMT

I'd need some information on CiscoSecure ACS.

I've read on Cisco's web-site that I can import a text file into the

CiscoSecure, in particular of the format reported below (concerning

mobile IP).

My questions are:

1) in which way can I import such a file? With the command line

interface I've founded a different format..

2)For which release of the CiscoSecure is this format valid?

3) Is it possibile to completely configure the ACS via a

text file? How?

Thank you for your attention and time.

This format can be imported into a CiscoSecure server.

user = 20.0.0.1 {

service = mobileip {

set spi#0 = "spi 100 key hex 12345678123456781234567812345678"

}

user = 20.0.0.2 {

service = mobileip {

set spi#0 = "spi 100 key hex 12345678123456781234567812345678"

}

user = 20.0.0.3 {

service = mobileip {

set spi#0 = "spi 100 key hex 12345678123456781234567812345678"

}

Example retrived from this address

Re: ACS Configuration

thisisshanky — Sat, 28 Sep 2002 02:08:08 GMT

I think u can use CSUtil.exe to import the file.