topic ISE 1.2 - Wrong Displayed Time in Network Access Control

ISE 1.2 - Wrong Displayed Time

i.va — Mon, 11 Mar 2019 03:55:30 GMT

Hi everybody,

I have an issue with ISE 1.2.0.899 concerning the sponsor portal. I have set up the ISE in UTC, and synced it to NTP. If I log in as a sponsor and create a guest account in timezone e.g. GMT +02:00 Europe/Zurich ...

...I get a confirmation like this:

It can be seen that the Timezone is shown correctly, but the Start/End time of the account is still shown in UTC!! The time above should be from 7:45 until 8:45. This is very confusing for Sponsors and Guests, as these results are printed and handed out to guests. Is there a possibility to change this behavior? I have looked through the language template, managed changed the time format, but did not find an option to change the displayed start/end time.

Hope someone can help me with this!!

Regards

ISE 1.2 - Wrong Displayed Time

aqjaved — Wed, 25 Sep 2013 12:22:18 GMT

Please check the below links which may be helpful for you:

Link-1

http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_custom_portals.html

ISE 1.2 - Wrong Displayed Time

Muhammad Munir — Thu, 26 Sep 2013 08:54:20 GMT

Please go through the given link this might be helpful to you:

http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_mnt.html#wp1054328