topic EAP TLS for machine and EAP PEAP for user in Network Access Control https://community.cisco.com/t5/network-access-control/eap-tls-for-machine-and-eap-peap-for-user/m-p/2349075#M107324 <HTML><HEAD></HEAD><BODY><P>You can not use the native supplicant for this. Cisco Anyconnect NAM will allow you to use this method. It is very simple to configure and deploy.</P><P></P><P></P><P>Tarik Admani <BR />*Please rate helpful posts*</P></BODY></HTML> Thu, 19 Sep 2013 05:15:16 GMT Tarik Admani 2013-09-19T05:15:16Z EAP TLS for machine and EAP PEAP for user https://community.cisco.com/t5/network-access-control/eap-tls-for-machine-and-eap-peap-for-user/m-p/2349074#M107310 <P>Hi forum</P><P></P><P>I am doing a design to use ISE to enforece dot1x for corporate machinese on both wired and wireless.</P><P></P><P>Due to the particular environment, we will need to use EAP-TLS for machines auth and on top of that use EAP-PEAP for user auth with windows credential and posture for full access.</P><P></P><P>Just wondering if anyone has done this before:</P><P>1. Will this work?</P><P>2. Any gottas?</P><P>3. what is the user experience like?</P><P></P><P>All machines are win7 based.</P><P></P><P>Thanks</P> Mon, 11 Mar 2019 03:55:15 GMT https://community.cisco.com/t5/network-access-control/eap-tls-for-machine-and-eap-peap-for-user/m-p/2349074#M107310 zma 2019-03-11T03:55:15Z EAP TLS for machine and EAP PEAP for user https://community.cisco.com/t5/network-access-control/eap-tls-for-machine-and-eap-peap-for-user/m-p/2349075#M107324 <HTML><HEAD></HEAD><BODY><P>You can not use the native supplicant for this. Cisco Anyconnect NAM will allow you to use this method. It is very simple to configure and deploy.</P><P></P><P></P><P>Tarik Admani <BR />*Please rate helpful posts*</P></BODY></HTML> Thu, 19 Sep 2013 05:15:16 GMT https://community.cisco.com/t5/network-access-control/eap-tls-for-machine-and-eap-peap-for-user/m-p/2349075#M107324 Tarik Admani 2013-09-19T05:15:16Z