topic wasMachinAuthenticated in Network Access Control

wasMachinAuthenticated

jiyoung Kim — Mon, 11 Mar 2019 03:54:29 GMT

Hi all, I have adivsed to use was MachinAuthenticated, but I can't get same results everytime I test it.

can anybody tell me how it works in detail ?

when I test it, sometimes the AD-joined PC gets wasmachinAuthenticated equals true, sometimes not.

I'm using ISE 1.2 with patch 1

wasMachinAuthenticated

Venkatesh Attuluri — Tue, 17 Sep 2013 11:35:42 GMT

check this Doc" Tips to make Machine Authentication Work"

https://supportforums.cisco.com/docs/DOC-21825

wasMachinAuthenticated

Jatin Katyal — Tue, 17 Sep 2013 13:53:29 GMT

Further to what Venkatesh suggested, please verify the authorization rule you've created. If you only need Machine and user suthenticaton then look at the second rule in the screen shot.

~BR
Jatin Katyal

**Do rate helpful posts**

wasMachinAuthenticated

aqjaved — Tue, 17 Sep 2013 16:51:44 GMT

Please check the below link which can helpful for you in understanding and configuration of machine authentication:

http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_troubleshooting.pdf