topic ISE disk system IOPS in Network Access Control

ISE disk system IOPS

david.daverso — Mon, 11 Mar 2019 03:47:42 GMT

Clarifying the ISE vmware appliance specifications, Can anyone provide me the ISE hardware requirement for disk system IOPS equivalent to an SNS-3495?

Thanks much,

David D.

ISE disk system IOPS

shekharmore003 — Mon, 19 Aug 2013 21:13:48 GMT

http://www.cisco.com/en/US/docs/security/ise/1.2/installation_guide/ise_vmware.html


Cisco ISE Appliance	3495	3415
Endpoint Supported	20,000	5,000
CPU	2 X Quad Core 2.4 GHz Intel Xeon	1 X Quad Core 2.4 GHz Intel Xeon
CPU Model	E5-2609	E5-2609
# of Cores per CPU	4	4
# of Threads per CPU	4	4
Total CPU's	8	4
Intel® Hyper-Threading Technology	No	No
Memory	32 GB	16 GB
Hard Disk	2 x 600GB 6Gb SAS 10K RPM Raid 0 + 1	1 x 600GB 6Gb SAS 10K RPM
Operating System	64bit	64bit

ISE disk system IOPS

david.daverso — Mon, 19 Aug 2013 21:20:09 GMT

Thanks much, shekharmore003, but the info you provided does not indicate a disk system IOPS. An example of what I'm looking for is the Mobility Services Engine Data Sheet, where they specify IOPS for a low-end, standard, and high-end virtual appliances.

David D.

Re: ISE disk system IOPS

Tarik Admani — Tue, 20 Aug 2013 05:01:57 GMT

Cisco hasnt provided that in the documentation. It would best to open a tac case so they can have the BU provide a response.

In ISE 1.2 the minimum requirement is 50 Mbps, i know because I am getting the alarms where the minimum threshold is clearly labeled.

Hope this helps...(it would still be best to run this through tac for confirmation)

Sent from Cisco Technical Support iPad App