topic cisco ise 1.1.4 no open radius port in Network Access Control

cisco ise 1.1.4 no open radius port

novalink_cco — Mon, 11 Mar 2019 03:41:00 GMT

Hi,

I have a big issue with my ise appliance configured with the last version, which is 1.1.4

I have configured one network device but she doesn't want communicate with ise. The radius communication doesn't works.

In fact, we see when we do "sh ports" on the ise that the radius port are not open.
I ever installed one ise appliance in 1.1.3 and it works.

A idea ????? please

thanks for advanced

cisco ise 1.1.4 no open radius port

Jatin Katyal — Tue, 23 Jul 2013 02:58:22 GMT

Any recent changes you are aware of in your setup?

Can you attach the output of show ports.

Have you tried reloading the ISE box?

Did you simply upgrade the ISE box from 1.1.3 to 1.1.4 or you reimaged/restore the database?

~BR
Jatin Katyal

**Do rate helpful posts**

cisco ise 1.1.4 no open radius port

Tarik Admani — Tue, 23 Jul 2013 05:58:22 GMT

Hi,

Can you post the output of your show ports? Also is this in a distributed setup or is this a standalone node.

here are the port information on my psn -

udp: 10.250.250.183:58626, 10.250.250.183:1812, 10.250.250.183:1813, 10.250.250.183:1700, 0.0.0.0:60599, 10.250.250.183:3799, 10.250.250.183:1645, 10.250.250.183:1646,

From my admin node -

10.250.250.185:1700, 10.250.250.185:3799, 10.250.250.185:64217, 0.0.0.0:20057, 0.0.0.0:50140

If this is a standalone node, can you go to the deployment section and make sure that all checkboxes are selected, in particular the third box "Policy Service"

Tarik Admani
*Please rate helpful posts*