Process to update a SSL Certificate without CSR

ErickBCCNA — Mon, 11 Mar 2019 03:33:49 GMT

Can anyone tell me what I have to do to renew a certificate on the Cisco Clean Access Server without generating a new CSR?

The below was stated in the following link, but there is no discussion on the the process to get the SSL certificate renewed on the server without generating the CSR.

http://www.cisco.com/en/US/products/ps6128/products_qanda_item09186a00803b7a81.shtml

Q. Should I generate a new CSR to renew the certificate on the Clean Access Server?

A. No. For renewal of the certificate on the Clean Access Server, do not generate a new CSR. However, if you are generating a new CSR, then you have to upload the private key in the Clean Access Server. After uploading the private key, reboot the Clean Access Server. This completes the renewal process.

Process to update a SSL Certificate without CSR

Ravi Singh — Mon, 24 Jun 2013 02:41:07 GMT

There is no need to generate new CSR to renew the certifiace. please go through the below link it will help you.

http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/49/cas/s_admin.html

topic Process to update a SSL Certificate without CSR in Network Access Control

Process to update a SSL Certificate without CSR

Q. Should I generate a new CSR to renew the certificate on the Clean Access Server?

Process to update a SSL Certificate without CSR