topic Cisco ISE multiple EAP authentication methods question in Network Access Control

Cisco ISE multiple EAP authentication methods question

Nicholas Poole — Tue, 26 Mar 2019 00:30:24 GMT

With Cisco ISE can you have various clients each using different EAP methods, such as PEAP for Windows machines, MD5 for legacy and TLS for others?

My current efforts seem to fail as if a device gets a request from the ISE for an EAP method it doesnt understand it just times out.

Thanks in advance.

Re: Cisco ISE multiple EAP authentication methods question

Richard Atkin — Fri, 14 Jun 2013 07:16:08 GMT

Multiple EAP Methods work fine. If your Clients are being crap you could try forcing then to use a specific set of Allowed Authentication Method by creating more specific Authentication rules.

Sent from Cisco Technical Support iPad App

Cisco ISE multiple EAP authentication methods question

Nicholas Poole — Fri, 14 Jun 2013 09:00:35 GMT

Thanks for responding. I have seen a similar message from Tarik on this forum about a more elaborate AuthN policy but I havent seen a decent example to understand how the policy works. Do you know of a decent example?