topic WLC Web Auth Redirect URL point to an ISE Policy NODE only? in Network Access Control

WLC Web Auth Redirect URL point to an ISE Policy NODE only?

ajc — Mon, 11 Mar 2019 03:58:36 GMT

Hi all,

I was wondering if the Web Auth Redirect URL configured in the WLC can only point to an ISE Policy Persona Node so the Web Portal feature (see below) in the ISE is only active when the ISE device has that Policy Persona activated.

WLC Web Auth Redirect URL point to an ISE Policy NODE only?

Peter Koltl — Wed, 09 Oct 2013 08:04:32 GMT

It's called

Policy Services persona

and the node is called

Policy Services Node (PSN) (if no other persona is enabled on the node).

I would say your assumption is right. The Administration persona and the Monitoring persona are not capable of hosting the My Devices portal.

WLC Web Auth Redirect URL point to an ISE Policy NODE only?

ajc — Wed, 09 Oct 2013 14:09:09 GMT

Thanks Peter for your clarification regarding the semantic I used and the question I made.

Curiously, I tested it (configure the WLC Web Auth URL Redirect pointing to an ADM Node) and it did not work until I added the Policy Services persona into that ADM Node. I just wanted to verify that my test was correct because we want to make some changes in our deployment. Let me see if I can open a TAC Case in order to confirm this and add it to this post.

You need to have a PSN to

Venkatesh Attuluri — Wed, 12 Mar 2014 13:16:00 GMT

You need to have a PSN to perform CWA . PSN Provides network access, posture, guest access, client provisioning, and profiling services. This persona evaluates the policies and makes all the decisions. You can have more than one node assume this persona.