topic Re: Cisco ISE backups not working - root patch? in Network Access Control

Cisco ISE backups not working - root patch?

c.andrew — Mon, 11 Mar 2019 03:43:51 GMT

I have an NFR version of ISE with a permanent license (base & advanced). I've done a lot of work on my lab which I don't want to lose, but have noticed the backups have stopped working.

This is the error:

ise1/admin# backup ISE1-Backup-On-Demand repository backup-14 application ise encryption-key plain ***

% Creating backup with timestamped filename: ISE1-Backup-On-Demand-130804-1358.tar.gpg

% Error: Insufficient disk space to perform ISE backup

% Application backup error

This is the disk info:

ise1/admin# sh disks

disk repository: 6% used (307004 of 5944440)

Internal filesystems:

/ : 81% used ( 37881100 of 49517032)

/tmp : 2% used ( 17828 of 988116)

/storedconfig : 7% used ( 5690 of 93327)

/boot : 9% used ( 40449 of 489956)

/dev/shm : 0% used ( 0 of 2008272)

all internal filesystems have sufficient free space

I've seen where this can be fixed by applying a "root patch" to clear some space.

Is this "root patch" available anywhere because I can't find it on cisco.com.

Thanks,

Chris

Re: Cisco ISE backups not working - root patch?

Tarik Admani — Mon, 05 Aug 2013 05:12:25 GMT

You will have to get the patch from TAC.

Sent from Cisco Technical Support iPad App

Re: Cisco ISE backups not working - root patch?

c.andrew — Mon, 05 Aug 2013 07:56:31 GMT

I'm assuming I'd need a service contract to do this, which I don't believe is possible with an NFR product??

Cisco ISE backups not working - root patch?

Marcin Latosiewicz — Mon, 05 Aug 2013 08:59:00 GMT

Typically your Cisco SE, HTOM or AM can ask to bypass entitlement, but you'd need to sync with any of them.

Cisco ISE backups not working - root patch?

c.andrew — Mon, 05 Aug 2013 09:05:49 GMT

Thanks - will give that a try and report back.