ISE 1.1.2 : Missing field to name an endpoint

guillerm — Mon, 11 Mar 2019 03:16:29 GMT

Environment :

AP 2602, WLC 5508 V7.4, ISE 1.1.2, Prime Infras 1.2

For a specific SSID, we use MAC address as 1 of the conditions to authorize access only for the company-owned mobiles (smartphones and tablets), the other condition being, for the mobile, to present a valid AD user/password;

this way, the so-called BYODs are rejected since this is the rule within this company ;

The difficulty with this approach is the fact that there is no way in ISE Identities Endpoints nor Groups to associate a user-friendly name to the MAC address of the mobiles, which makes very tedious some actions such as a search in the ISE authentication Log based on the MAC address value itself;

the question is just to know if it is planned to add a new field in Identities Endpoints definition that would allow to associate a user-friendly name to a MAC address, for future ISE versions,

thanks in advance

ISE 1.1.2 : Missing field to name an endpoint

mkriss5681 — Tue, 09 Apr 2013 14:24:18 GMT

This seems like a no-brainer to me. Not being able to name or at least note endpoints makes management a nightmare.

topic ISE 1.1.2 : Missing field to name an endpoint in Network Access Control

ISE 1.1.2 : Missing field to name an endpoint

ISE 1.1.2 : Missing field to name an endpoint