How to remove aaa-server from PIX

laner61 — Mon, 11 Mar 2019 03:10:30 GMT

At one point I'd setup access for a VPN. I would now like to remove it, but can't find a way to "no" out the commands. Here's config from my PIX 506e:

***

fixup protocol dns maximum-length 512

fixup protocol ftp 21

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol http 80

fixup protocol pptp 1723

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol sip 5060

fixup protocol sip udp 5060

fixup protocol skinny 2000

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol tftp 69

- - -

access-list 101 permit tcp any host xx.xx.xxx.xxx eq 2000

access-list 101 permit tcp any host xx.xx.xxx.xxx eq 2002

access-list 101 permit tcp any host xx.xx.xxx.xxx eq h323

access-list 101 permit udp any host xx.xx.xxx.xxx eq 2427

access-list 101 permit udp any host xx.xx.xxx.xxx eq 5060

access-list 101 permit udp any host xx.xx.xxx.xxx eq 5062

---

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00

timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00

timeout sip-disconnect 0:02:00 sip-invite 0:03:00

timeout uauth 0:05:00 absolute

aaa-server TACACS+ protocol tacacs+

aaa-server TACACS+ max-failed-attempts 3

aaa-server TACACS+ deadtime 10

aaa-server RADIUS protocol radius

aaa-server RADIUS max-failed-attempts 3

aaa-server RADIUS deadtime 10

aaa-server LOCAL protocol local

***

I've tried "no aaa-server TACACS+ protocol tacacs+" - I get "cannot remove pre-defined server_tags"

I'm not trying to remove them, I just want to turn aaa off.

Help?

Thanks,

Lane

How to remove aaa-server from PIX

Jatin Katyal — Fri, 08 Mar 2013 15:52:43 GMT

This is unlike IOS where you can do "no aaa new-model". You first need to remove tacacs configuration before you remove the server group. Could you please attach the complete running config from the firewall.

Jatin Katyal

- Do rate helpful posts -

Re: How to remove aaa-server from PIX

laner61 — Fri, 08 Mar 2013 17:34:33 GMT

Jatin, I've attached the config - removing password and public IP addresses.

Thanks,

Lane

topic How to remove aaa-server from PIX in Network Access Control

How to remove aaa-server from PIX

How to remove aaa-server from PIX

Re: How to remove aaa-server from PIX