topic Cisco ACS Deployment in Network Access Control

Cisco ACS Deployment

s.patsuwan — Mon, 11 Mar 2019 03:06:38 GMT

I proposed New ACS 5.4 Appliance - CSACS-1121-K9 and upgrading current ACS 4.1 to ACS 5.4-CSACS-5.4-VM-UP-K9

my customer want to do configuration/databse replication between two ACS. Is it possible to that ACS in VM can work with ACS in appliance ?

thanks

sompoj

Jatin Katyal — Wed, 20 Feb 2013 16:31:59 GMT

There should not be any issues. It will work fine.

ACS distributed deployment.

ACS 4.x and 5.x replication

Regards,

Jatin Katyal

- Do rate helpful posts -

s.patsuwan — Tue, 26 Feb 2013 04:02:21 GMT

Hi Jatin,

thanks very much. Is it possible that version 4.2 can work with 5.4 for replication ?

Current, customer already has version 4.2

thanks

sompoj

Jatin Katyal — Tue, 26 Feb 2013 06:43:52 GMT

In order to perform replication, both the devices should be running on the same code/patch. ACS code 4.2 can not replicate its database with ACS 5.4

Regards,

Jatin Katyal

- Do rate helpful posts -

ramkumar — Thu, 20 Feb 2014 11:16:44 GMT

Hi sompoj / All ,

our customer also need the same requirement. i have added the ACS in primary and secondary.

i tried the failover but it was not working.

what are the commands have to give in the switch side for the failover deployment?

Please help.

Thanks,

P.Ramkumar.

ramkumar — Thu, 20 Feb 2014 11:29:47 GMT

Hi sompoj,

Refer this video link it may be helpful for replicate the ACS 5.4 servers.

Thanks,

P.Ramkumar.