topic Cisco ISE 1.2 (802.1x wires with MS RDP) in Network Access Control

Cisco ISE 1.2 (802.1x wires with MS RDP)

ibrahim_hassan — Mon, 11 Mar 2019 04:07:00 GMT

we configured 802.1x , machine and user are authenicated and get thier profiles based on authorization policy from ISE.

for support purposes , we are using microsoft Remote desktop to access remote machines.

the problem is when i login on remote machine with RDP , the NAD (switch) dispaly logoff status and not detect that new remotly user login now,

which cause some issues due to applied ACL in logoff state.

Cisco ISE 1.2 (802.1x wires with MS RDP)

Peter Koltl — Fri, 22 Nov 2013 21:54:07 GMT

I've had the same experience. It seems Windows supplicant does not authenticate when the user logs on remotely via RDP. (Even if the RDP arrives on WLAN interface.) Actually, I can understand the reasons.

Cisco ISE 1.2 (802.1x wires with MS RDP)

Venkatesh Attuluri — Sun, 24 Nov 2013 11:00:12 GMT

Pls check this link

https://supportforums.cisco.com/message/3899469#3899469

HiDid you fixed your issueI

nicanor00 — Tue, 30 Sep 2014 11:50:34 GMT

Did you fixed your issue

I have the same issue

Please help

Regards

I think there is no fix ,

ibrahim_hassan — Sun, 09 Nov 2014 12:52:09 GMT

I think there is no fix , except you disable machine authentication 😞