topic ISE MDM response codes in Network Access Control

ISE MDM response codes

William Maguire — Mon, 11 Mar 2019 04:04:13 GMT

Hi,

I'm working on a Lab of ISE and MDM (a beta connector) project and am stuck in a registration loop. I have verified that the mobile device is registered with MDM and it is also registered with ISE in the my device portal. When I connect to wireless the device shows it matched the MDM onboard rule and I see this in the log.

2013-11-06 15:46:49,907 INFO [Thread-64][] cisco.cpm.mdm.util.MdmRESTClient -::0ac8db4600000282527a5e53:::- MDM Server Response Code: 200

I cant find a list of MDM response codes on Cisco.com does anyone have a list? I am guessing response code: 200 does not mean MDM Registered.

I am running ISE 1.2 patch 3 and WLC code 7.4.115.0

Thanks,

Bill

ISE MDM response codes

Charlie Moreton — Wed, 06 Nov 2013 16:52:10 GMT

It looks as though this is the response the ISE is receiving from the MDM server. Which MDM Vendor are you using? This may be the path to follow.

ISE MDM response codes

William Maguire — Wed, 06 Nov 2013 18:08:03 GMT

The MDM Vendor is Tangoe. As I said its a beta connector and yes thats the responde coming from Tangoe. I was hoping to find a list of responses ISE is looking for but it looks like that is not in the regular CCO site.

ISE MDM response codes

Charlie Moreton — Wed, 06 Nov 2013 18:26:13 GMT

Unfortunately, the API connectors for MDM are not published. The MDM vendors that are already supported have had to work directly with the ISE Business Unit to get the connectors working correctly.

That being said, the API will be opened up considerably in v1.3, but that is a few months away.

Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.

Charles Moreton

ISE MDM response codes

William Maguire — Wed, 06 Nov 2013 18:32:40 GMT

Charles, thanks, of course this didnt answer my question but it was helpful and I marked it as such. I believe Tangoe and Cisco are working together on this as we speak. My BU contact is ooo so I tossed the question out here hoping someone would know what "response code 200" actually means. Thanks for the reply.

ISE MDM response codes

Charlie Moreton — Wed, 06 Nov 2013 18:52:01 GMT

Yeah, I know that I wasn't much help on this, but figured I would pass on what I did know...