topic what are steps configure Certificate based authentication for Wireless clients with ACS 5.3? in Network Access Control

what are steps configure Certificate based authentication for Wireless clients with ACS 5.3?

bireshwark — Mon, 11 Mar 2019 03:14:36 GMT

I need to autheticate my clients connecting via wireless.

clients have user certificate installed on them, i need help configuring the ACS to do the authentication.

can some one please help me with the steps.

Thanks

jrabinow — Fri, 29 Mar 2013 09:19:26 GMT

Two primary steps

- define the trust certificates needed to verify the clients user certificates

Users and Identity Stores > Certificate Authorities

- change result of identity policy to select a certificate authorization profile. If have the defautl config

Access Policies > Access Services > Default Network Access > Identity

by default can select the "CN Username" as a result

Amjad Abdullah — Fri, 29 Mar 2013 11:22:48 GMT

This will be useful:
https://supportforums.cisco.com/docs/DOC-21679

Rather than using PEAP you need to use EAP-TLS.

HTH

Amjad

Sent from Cisco Technical Support iPad App