topic ISE License in Network Access Control

ISE License

integrixSS — Mon, 11 Mar 2019 03:03:31 GMT

Dear Team,

Please help me for the below mentioned ISE deployment

I want to deploy ISE in a DC & DR environmental. There are two WAN links used for both location at a time e.g.

1. A (DC) & B (DR) if either of the link down then traffic will be forward by the other location either A or B.

2. There are MPLS connectivity between DC & DR sites.

3. I want to go with two ISE appliances (2 for each sites).

4. Please suggest license option for 500 users (Basic+ advance).

5. Shall I require only one license for all the appliances (Basic+ Advance).

6. I want to run both the site active at a time.

Please suggest appr. license for all the appliances in this case.

Thanks & regards,

Rajesh Kumar

ISE License

shekharmore003 — Fri, 22 Feb 2013 21:45:53 GMT

You apply the Licenses only on Admin node. You will need only 1 set of licenses

ISE License

integrixSS — Mon, 04 Mar 2013 06:24:23 GMT

Dear Shekhar,

Thanks,

Can you tell me one thing more, If one location is in India(DC) and second location in USA(DR).Then 1 set of license (Basic_Advance) will work for both location as suggest by you earlier.

Regards,

Rajesh

ISE License

shekharmore003 — Mon, 04 Mar 2013 15:01:23 GMT

Hello Rajesh,

As you asked me again, I think you have some doubts.

We will need just one set of Lincense per primary Admin persona per ISE deployment.

I think you have ISE deployment as follows.

India (DC) - ISE1:Admin&MnT (Primary) + ISE2:PSN

USA (DR) - ISE3:Admin&MnT (Secondary) + ISE4:PSN

If you have above mentioned scenario then you will need to install only one set of license on India (DC) - Admin&MnT (Primary)

But If you have a ISE deployment as follows then you will need two sets of license.

India (DC) - ISE1: (Primary)Admin&MnT&PSN + ISE2:(Secondary)Admin&MnT&PSN

USA (DR) - ISE1: (Primary)Admin&MnT&PSN + ISE2:(Secondary)Admin&MnT&PSN

The Above mentioned deployement are completly saperate ISE deployments. so here you will need two sets of license one on India (DC) - ISE1: (Primary)Admin&MnT&PSN and second on USA (DR) - ISE1: (Primary)Admin&MnT&PSN

Please let me know what kind of ISE deployment you are planning for...

Thanks,

Chandrashekhar More

ISE License

Venkatesh Attuluri — Thu, 07 Mar 2013 03:42:38 GMT

As per your scenario and assuming you are using HA for ISE that mean only one instance of ISE is running so you need 1 set of basic + advanced licence i.e L-ISE-ADV3Y-500= , L-ISE-BSE-500=

Note license is applied for ISE instance rather that appliance

ISE License

integrixSS — Mon, 11 Mar 2013 04:19:46 GMT

Dear Shekhar,

Thanks, I got my answer.

Regards,

Rajesh

ISE License

integrixSS — Mon, 11 Mar 2013 04:21:04 GMT

Dear Venkatesh,

Thanks,

Regards,

Rajesh

ISE License

Anas Naqvi — Thu, 26 Sep 2013 06:21:26 GMT

Hi Rejesh,

FYI, ISE 1.2 now inlcudes the feature of 'Rehosting'.Rehosting allows the customer to reassign an existing ISE license to another ISE appliance, acting as a Primary and/or Secondary Node. Customers can use the rehosting feature to modify their existing ISE license (registered to a single node) to be supported on Primary and Secondary ISE Administration Nodes or just a new Primary node. The license term is not changed when rehosted.