topic WLC 5508 (ver >7.2) and ISE 1.1.2 in Network Access Control

WLC 5508 (ver >7.2) and ISE 1.1.2

Luciano Vigano' — Mon, 11 Mar 2019 02:47:47 GMT

Ciao,

I found this interesting article:

Dynamic VLAN Assignment with RADIUS Server and Wireless LAN Controller Configuration Example

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml

And I'm wondering if the same configuration will work with ISE 1.1.2.

My needs are:

- one SSID

- according to authentication (for guest: user\pwd in ISE database; for employees certificate or user\pwd M$ AD) moved to a VLAN or another

Ciao e grazie!

Luciano

WLC 5508 (ver >7.2) and ISE 1.1.2

Philip Vilhelmsson — Tue, 04 Dec 2012 15:43:17 GMT

Hi,

Did you find an answer to your question?

I am looking to do the same, with FlexConnect APs.

//Philip

WLC 5508 (ver >7.2) and ISE 1.1.2

edondurguti — Tue, 04 Dec 2012 19:17:48 GMT

If you have centrally switched enviroment and WLC 7.2 sure it will work, but if you have flexconnect(local switching) APs it will not work on 7.2, you will need to upgrade to 7.3

Hope it helps

WLC 5508 (ver >7.2) and ISE 1.1.2

Philip Vilhelmsson — Wed, 05 Dec 2012 09:40:15 GMT

What is it that doesn't work in 7.2? COA, dVLAN?

In the FlexConnect Feature Matrix it say that local switching is supported in 7.2.110.0.

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080b3690b.shtml

WLC 5508 (ver >7.2) and ISE 1.1.2

edondurguti — Wed, 05 Dec 2012 14:36:56 GMT

Philip,

My bad, I apologize for the confusion, they put so many numbers on the back

here this might help.

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bcb905.shtml