topic ISE with Domino LDAP Integration in Network Access Control

ISE with Domino LDAP Integration

Pongsatorn Maneesud — Mon, 11 Mar 2019 02:43:10 GMT

Hi everyone,

Does anyone has know about Domino LDAP ? I would like to integrate this LDAP with Cisco ISE.

I try to bind this LDAP but it does not show me anything in "Naming Context". So I cannot choose group to map into ISE.

I test this on WLC. It is success to do but cannot make the same thing with Cisco ISE.

Is this LDAP supports with Cisco ISE 1.1.1 ?

Regards,

Pongsatorn Maneesud

ISE with Domino LDAP Integration

Tarik Admani — Thu, 25 Oct 2012 03:01:40 GMT

Hi,

There are two templates that are supported (schemas) one is for AD and the other is for openLdap, do you have a screenshot on how the WLC is configured?

However you can create your own see if this guide gets you started:

http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_man_id_stores.html#wp1068762

Here is some information on the domino schema -

http://www-12.lotus.com/ldd/doc/domino_notes/rnext/help6_admin.nsf/b3266a3c17f9bb7085256b870069c0a9/715915cede8d461685256c1d00393b5d?OpenDocument

Thanks,

Tarik admani

ISE with Domino LDAP Integration

Pongsatorn Maneesud — Thu, 25 Oct 2012 03:58:46 GMT

Hi Tarik,

I have a screenshot but it is not allow to show (customer's owned). Anyway I can see something from WLC configuration. It uses Base DN with * so all attributes under this Directory will come out.

I use LDAP Browser to check this again and I cannot get any attributes that can use for Group Object Class. So, I think it cannot use with ISE because on the domino LDAP does not contains attribute that relate to general LDAP.

I will check this issue again after I can build this domino LDAP to test in my environment.

Thanks,

Pongsatorn

ISE with Domino LDAP Integration

Naveen Kumar — Fri, 26 Apr 2013 21:06:09 GMT

Hello,

Yes these LDAP series are supported with ISE.

LDAP Servers
SunONE LDAP Directory Server	Version 5.2
Linux LDAP Directory Server	Version 2.4.23
Cisco NAC Profiler	Version 2.18 or later

Ref Link:
http://www.cisco.com/en/US/docs/security/ise/1.1.1/compatibility/ise_sdt.html#wp60357