topic ACS 5.3 applying patch in Network Access Control

ACS 5.3 applying patch

ngtransge — Mon, 11 Mar 2019 02:32:20 GMT

Hello,

I have problem with applying patch on ACS 5.3. In release notes there is mentioned following command format:

acs patch install patch-name.tar.gpg repository repository-name

The problem is ACS 5.3 does't have this command syntax.

It does't have acs command.

Here is what i have trued:

acs/admin# patch install 5-3-0-40-1.tar.gpg rep

Do you want to save the current configuration ? (yes/no) [yes] ?

Generating configuration...

Saved the running configuration to startup successfully

% Manifest file not found in the bundle

repository rep

url ftp://172.30.5.217

user user password hash c7b11123e528660abea78d974339875394fbb234

Here is supported command that i found on ACS 5.3.

acs/admin# ?

Exec commands:

application Application Install and Administration

backup Backup system

backup-logs Backup system and application logs

clock Set the system clock

configure Enter configuration mode

copy Copy commands

debug Debugging functions (see also 'undebug')

delete Delete a file

dir List files on local filesystem

exit Exit from the EXEC

forceout Force Logout all the sessions of a specific system user

halt Shutdown the system

mkdir Create new directory

nslookup DNS lookup for an IP address or hostname

patch Install System or Application Patch

ping Ping a remote ip address

reload Reboot the system

restore Restore system

rmdir Remove existing directory

show Show running system information

ssh SSH to a remote ip address

tech TAC commands

telnet Telnet to a remote ip address

terminal Set terminal line parameters

traceroute Trace the route to a remote ip address

undebug Disable debugging functions (see also 'debug')

write Write running system information

acs/admin#

ACS 5.3 applying patch

Tarik Admani — Wed, 12 Sep 2012 14:30:22 GMT

Hi,

I find this odd, can you run a "show application"

Here is the output of my ACS -

Version information of installed applications

---------------------------------------------

Cisco ACS VERSION INFORMATION

-----------------------------

Version : 5.3.0.40.4

Internal Build ID : B.839.EVAL

Patches :

5-3-0-40-2

5-3-0-40-4

gdtsrv-acs5/admin# ?

Exec commands:

acs ACS control commands

acs-config ACS config mode

application Application Install and Administration

backup Backup system

backup-logs Backup system and application logs

clock Set the system clock

configure Enter configuration mode

copy Copy commands

debug Debugging functions (see also 'undebug')

delete Delete a file

dir List files on local filesystem

exit Exit from the EXEC

forceout Force Logout all the sessions of a specific system user

halt Shutdown the system

mkdir Create new directory

nslookup DNS lookup for an IP address or hostname

patch Install System or Application Patch

ping Ping a remote ip address

reload Reboot the system

restore Restore system

rmdir Remove existing directory

show Show running system information

ssh SSH to a remote ip address

tech TAC commands

telnet Telnet to a remote ip address

terminal Set terminal line parameters

traceroute Trace the route to a remote ip address

undebug Disable debugging functions (see also 'debug')

write Write running system information

Tarik Admani
*Please rate helpful posts*

ACS 5.3 applying patch

wingchuen — Wed, 03 Jul 2013 11:45:45 GMT

The actual command you are looking for is #acs patch install 5-3-0-40-1.tar.gpg repository rep

Regards