topic ISE 3315 stuck in INIT Entering runlevel: 3 in Network Access Control

ISE 3315 stuck in INIT Entering runlevel: 3

Guillaume BARBEROT — Wed, 13 Mar 2019 00:41:06 GMT

Hello

my ISE 3315 is stuck in

ISE 3315 stuck in INIT Entering runlevel: 3

when i connect a screen and keyboard i can only see this last message :

ISE 3315 stuck in INIT Entering runlevel: 3

There is nothing after, i cannot login (no prompt) even after waiting 20 minutes with this message

I have no char return via serial cable depsite i was able to run initial setup from console (same cable, the DB9-DB9 provided, same serial config, same laptop)

really strange

Version ADE : ADE-OS-2.0 (2.6.18-238.1.1.el5PAE)

Version ISE : 1.1.0.665

Any idea ?

Thanks

Guillaume

ISE 3315 stuck in INIT Entering runlevel: 3

Guillaume BARBEROT — Tue, 02 Oct 2012 13:11:21 GMT

Finally it worked ... after more than 1 hour ... (went out for lunch) !

ISE seams really slow on the 3315 servers

ISE 3315 stuck in INIT Entering runlevel: 3

komsakchim — Mon, 18 Mar 2013 08:02:15 GMT

Good to heard that.

For me, I still stuck on this page after 15 mins. I will wait for 1 and half hour. >_<"

ISE 3315 stuck in INIT Entering runlevel: 3

Guillaume BARBEROT — Mon, 18 Mar 2013 09:17:55 GMT

Hello,

for me i can say it is too slow if you don't have a DNS and a NTP server accessible from the ISE.

It is requested to have both servers during initial setup, and with that, it is running faster (let's say 30 minutes to do all initial setup ...)

Hope it helps !

ISE 3315 stuck in INIT Entering runlevel: 3

david.tran — Wed, 20 Mar 2013 10:40:24 GMT

this is also a "me too" comment. I set up two 3395 ISE and they are both very slow, when upgrading from 1.1.1 to 1.1.2, took about 45 minutes for the upgrade. Furthermore, upgrading the ISE to patch-5, a 14MB file, took about 45 minutes for ISE to patch and getting it back to function properly.