topic ask about the ISE solution in Network Access Control

ask about the ISE solution

khang2711 — Mon, 11 Mar 2019 03:19:39 GMT

Dear anyone,

I have some question about the ISE solution:

1/ If we use Dlink access switch or unmanaged switch (linksys of cisco), we can use ISE solution and ISE can control which the devices put in the network and apply policy to other devices (iphone, ipad, laptop)?

2/ If ISE can use with other vendor switch, what is the different between Cisco switch and other vendor switches? What is the benefits when using CIsco Switch?

3/ The recommend of Cisco: which devices we must have in the network when deploying Cisco ISE? which recommend features of switch must support to deploy ISE?

Please answer me early.

Thank,

ask about the ISE solution

Saurav Lodh — Thu, 18 Apr 2013 13:11:39 GMT

You can follow cisco trustsec solution ( switches included) , below is the link :

http://www.cisco.com/en/US/docs/switches/lan/trustsec/configuration/guide/config.html

Re: ask about the ISE solution

khang2711 — Fri, 19 Apr 2013 07:26:41 GMT

The ISE device only support cisco switch and don't support other vendor?

Sent from Cisco Technical Support iPad App

Re: ask about the ISE solution

Tarik Admani — Fri, 19 Apr 2013 14:08:18 GMT

Hi,

The ise solution currently only supports cisco switches, wireless controllers. However you can consider the use of an inline posture node so that unsupported network devices (which support radius authentication and accounting) however this can make the solution complex to support and troubleshoot.

Thanks,
Tarik Admani

Sent from Cisco Technical Support iPad App