topic radius server config in Network Access Control https://community.cisco.com/t5/network-access-control/radius-server-config/m-p/2038283#M163614 <HTML><HEAD></HEAD><BODY><P> "radius-server dead-criteria" will be used to mark the server as dead only if used along with "radius-server deadtime"</P><P></P><P><A href="http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gt_adsd.html#wp1027184">http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gt_adsd.html#wp1027184</A></P><P></P><P>On the other hand "Radius-server host" with timeout and retransmit will be used to try a different radius-server in the order they are listed.</P><P></P><P>Please rate if it helps</P></BODY></HTML> Fri, 28 Sep 2012 15:56:25 GMT Eduardo Aliaga 2012-09-28T15:56:25Z radius server config https://community.cisco.com/t5/network-access-control/radius-server-config/m-p/2038282#M163582 <P>Could someone explain the difference between these two commands:</P><P></P><P>radius-server dead-criteria time 2 tries 3</P><P>and</P><P>radius-server host 1.1.1.1 auth-port 1645 acct-port 1646 timeout 2 retransmit 3</P><P></P><P>When will be the radius server be marked dead/alive? Based on dead-criteria time/tries OR based on radius-server timeout/retransmit?</P> Mon, 11 Mar 2019 02:36:24 GMT https://community.cisco.com/t5/network-access-control/radius-server-config/m-p/2038282#M163582 Kashish_Patel 2019-03-11T02:36:24Z radius server config https://community.cisco.com/t5/network-access-control/radius-server-config/m-p/2038283#M163614 <HTML><HEAD></HEAD><BODY><P> "radius-server dead-criteria" will be used to mark the server as dead only if used along with "radius-server deadtime"</P><P></P><P><A href="http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gt_adsd.html#wp1027184">http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gt_adsd.html#wp1027184</A></P><P></P><P>On the other hand "Radius-server host" with timeout and retransmit will be used to try a different radius-server in the order they are listed.</P><P></P><P>Please rate if it helps</P></BODY></HTML> Fri, 28 Sep 2012 15:56:25 GMT https://community.cisco.com/t5/network-access-control/radius-server-config/m-p/2038283#M163614 Eduardo Aliaga 2012-09-28T15:56:25Z