topic Posture Validation on ACS 5.3 in Network Access Control

Posture Validation on ACS 5.3

ComstorFR — Mon, 11 Mar 2019 02:31:31 GMT

Can anyone tell me if it's possible to enable Posture validation on ACS 5.3.

If so, could I have a link or a procedure for implementation ?

best regards

Posture Validation on ACS 5.3

Tarik Admani — Mon, 10 Sep 2012 16:36:54 GMT

Hi,

ACS 5.3 does not perform posture validation, like 4.2 did. That was known as nac framework and Cisco has dedicated appliance (Cisco clean access - cisco.com/go/nac) and a new appliance which uses radius and is a hybrid of ACS 5 and nac called ISE (cisco.com/go/ise).

Thanks,

Tarik Admani
*Please rate helpful posts*

Posture Validation on ACS 5.3

ComstorFR — Mon, 10 Sep 2012 16:58:12 GMT

Hi Tarik,

Thank you for your reply

but why some links like this, it appears that ACS5.3 can activate posture validation

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps5698/ps6767/ps9911/data_sheet_c78-683481.pdf

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/ACSuserguide.pdf

So what can we do to get this feature with ACS 5.3 (1121-K9). can we migrate to ISE 1.0? our customer is not a ATP certified and therefore can not buy ISE

Posture Validation on ACS 5.3

Tarik Admani — Mon, 10 Sep 2012 17:05:51 GMT

Hi,

You bring up a very interesting point, however from my experience with supporting and working with ACS there isnt any posture validation configuration that I know of, also in the user guide there isnt a posture validation section that I have seen. I am wondering if this is a documentation bug to see if this needs to be addressed.

If you look at the migration mapping found here:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/migration/guide/Appendix_B_Config_Mapping.html

There is an "N/A" for posture validation on ACS 5.x

Thanks,

Tarik Admani
*Please rate helpful posts*