topic I have this problem also, in Network Access Control

Cisco Secure ACS 5.2 Patch Installation Issue

dcountryman68 — Mon, 11 Mar 2019 02:31:33 GMT

I am trying to apply patch 5.2.0.26.10 to a newly installed Cisco Secure ACS Server. When I run the acs patch install command it fails.

Here is my repos config:

repository Update

url sftp://10.134.52.115/

user id4sftp password removed

sh repo Update - output

5-2-0-26-10.tar.gpg

Command Execution:

acs patch install 5-2-0-26-10.tar.gpg repository Update

Response:

Failed to copy file '5-2-0-26-10.tar.gpg' from repository Update

(Error -306)

% Error: patch install 5-2-0-26-10.tar.gpg from repository Update - transfer failed (code 1)

Debugs: (debug transfer 7, debug copy 7) Response

6 [20989]: transfer: cars_xfer.c[47] [admin]: sftp copy in of 5-2-0-26-10.tar.gpg requested

6 [20989]: transfer: cars_xfer_util.c[480] [admin]: resolved server to 10.134.52.115

7 [20989]: transfer: cars_xfer_util.c[487] [admin]: copying /home/id4sftp/5-2-0-26-10.tar.gpg from remote server: 10.134.52.115

7 [20990]: transfer: sftp_copy.c[70] [daemon]: Executing SFTP command: /usr/bin/scp -o StrictHostKeyChecking=no id4sftp@10.134.52.115:/home/id4sftp/5-2-0-26-10.tar.gpg /opt/CSCOacs/patches/5-2-0-26-10.tar.gpg

3 [20989]: transfer: sftp_copy.c[137] [admin]: sftp_copy ERROR: timeout!

Failed to copy file '5-2-0-26-10.tar.gpg' from repository Update

(Error -306)

% Error: patch install 5-2-0-26-10.tar.gpg from repository Update - transfer failed (code 1)

3 [20989]: transfer: sftp_copy.c[230] [admin]: sftp_copy ERROR: command execution failed

Thank you very much for your assistance

David

Cisco Secure ACS 5.2 Patch Installation Issue

Tarik Admani — Mon, 10 Sep 2012 16:41:41 GMT

Hi,

There is a bug in the 5.2 code so that when a sftp file transfer takes over 60 seconds it will cause errors, can you try with ftp?

Thanks,

Tarik Admani
*Please rate helpful posts*

Cisco Secure ACS 5.2 Patch Installation Issue

dcountryman68 — Mon, 10 Sep 2012 16:47:36 GMT

I will work on trying FTP now. Are there any other options? I am running this in a VM instance, so not exactly sure if I can create an ISO and try to copy from it over to the server then run it.

Thank you

Cisco Secure ACS 5.2 Patch Installation Issue

Tarik Admani — Mon, 10 Sep 2012 17:08:27 GMT

Your best bet is to use filezilla server and run it on your host machine that has acs connectivity.

Thanks,

Tarik Admani
*Please rate helpful posts*

Cisco Secure ACS 5.2 Patch Installation Issue

dcountryman68 — Mon, 10 Sep 2012 19:59:17 GMT

Tarik,

Thank you very much for your replies.

I was able to perform the update via FTP.

Thank you again

I have this problem also,

sherman.jones — Tue, 12 Jan 2016 20:32:00 GMT

I have this problem also, however, I am not allowed to use ftp. I have to use sftp, any help with this will be appreciated.

acs patch install 5-2-0-26-10.tar.gpg repository Update

Response:

Failed to copy file '5-2-0-26-10.tar.gpg' from repository Update

(Error -306)

% Error: patch install 5-2-0-26-10.tar.gpg from repository Update - transfer failed (code 1)