topic ACS dictionary file in Network Access Control

ACS dictionary file

Kashish_Patel — Mon, 11 Mar 2019 02:14:42 GMT

Hi Security Experts,

I have a requirement to add a third-party box (niksun appliance used for sniffing packets) as a radius client in ACS 4.2.

I have gone through the configuration guide of niksun to see how it should be done.

As per their documentation, I have to create a file on the ACS server ( our ACS is installed in a windows 2003 server) and this file should include Niksun Vendor ID. Then I have to include this file in ACS dictionary file.

Could you give me an example of how this is done on ACS 4.2? FYI our ACS is installed in a windows 2003 server.

PS : I rate useful posts.

Thanks,

Kashish

ACS dictionary file

Kashish_Patel — Wed, 27 Jun 2012 11:19:06 GMT

Can some security expert help me out here?

ACS dictionary file

maldehne — Wed, 27 Jun 2012 13:03:54 GMT

Well Well

You are talking about defining custom radius vendor on ACS.

This can be done using RDBMS synchronization feature , by having account actions.csv file built based on the dictionary defintion of the third party vendor and importing it back to ACS.

Check the following link for further info:

http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/A_RDBMS.html#wp148322

the following actiond codes should be the core for achieving your task:

350 ADD_UDV

352 ADD_VSA

353 SET_VSA_PROFILE

354 ADD_VSA_ENUM

355 ADOPT_NEW_UDV_OR_VSA

-------------------------------------------------------------------

Make sure to rate correct answer

ACS dictionary file

Kashish_Patel — Fri, 06 Jul 2012 02:50:33 GMT

Thanks maldehne.

On further reading, I found that same thing can be done using csutil. I used csutil and was able to add custom radius vendor. But I am sure RDBMS would also have worked.

Thanks,

Kashish